QingDao JiaDe Bearing Co.,Ltd |
|
72 Series High Precision Angular Contact Ball Bearing 7209AC Bearing Size 45*85*19mm
Description:
There are several types of angular contact ball bearings: 7000C
(∝=15°), 7000AC (∝=25°) and 7000B (∝=40°). The lock of this kind of
bearing is on the outer ring. Generally, the inner and outer rings
cannot be separated, and can bear the combined radial and axial
load and the axial load in one direction. The ability to bear the
axial load is determined by the contact angle. The larger the
contact angle, the higher the ability to bear the axial load. This
kind of bearing can limit the axial displacement of the shaft or
housing in one direction.
The contact ball bearing has a high limit speed and can bear radial
load and axial load at the same time, and it can also bear pure
axial load. Its axial load capacity is determined by the contact
angle and increases with the increase of the contact angle.
Single row angular contact ball bearings
Single row angular contact ball bearings can only bear axial load
in one direction. When bearing radial load, additional axial force
will be caused and corresponding reverse load must be applied.
Therefore, this kind of bearings are generally used in pairs.
Double row angular contact ball bearings can withstand larger
radial and axial bidirectional combined loads and moment loads,
mainly radial loads. It can limit the axial displacement of the
shaft or housing in both directions, with a contact angle of 30
degrees.
Bearing code: 7
Angular contact ball bearings installed in pairs
Angular contact ball bearings installed in pairs can withstand
combined radial and axial bidirectional loads based on radial
loads, as well as pure radial loads. The series configuration can
only bear axial load in a single direction, and the other two
configurations can bear axial load in either direction. This type
of bearing is generally selected and combined by the manufacturer
and submitted to the user in pairs. After installation, there is
preload interference, and the ring and steel ball are in the axial
preload state, thus increasing the rigidity and rotation of the
entire group of bearings as a single support Accuracy.
Back-to-back configuration, the rear code is DB (such as 70000/DB),
the load line of the back-to-back paired bearings is separated to
the bearing shaft. It can bear the axial load acting in two
directions, but the load in each direction can only be borne by one
bearing. Bearings mounted back-to-back provide a relatively rigid
bearing configuration and can withstand overturning moments.
Face-to-face configuration, the rear code is DF (such as 70000/DF),
and the load lines of the face-to-face paired bearings converge
toward the bearing shaft. It can bear the axial load acting in two
directions, but the load in each direction can only be borne by one
bearing. This configuration is not as rigid as the back-to-back
pairing, and it is not suitable for withstanding overturning
moments. The rigidity and ability of bearing overturning moment of
this configuration are not as good as the DB configuration, and the
bearing can bear bidirectional axial load;
Tandem configuration, the post code is DT (such as 70000/DT), in
tandem configuration, the load lines are parallel, and the radial
and axial loads are evenly shared by the bearing. However, the
bearing assembly can only bear axial loads acting in one direction.
If the axial load acts in the opposite direction, or if there is a
compound load, a third bearing adjusted relative to the tandem
paired bearing must be added. This configuration can also be
connected in series with three or more bearings at the same
support, but it can only withstand unidirectional axial loads.
Generally, in order to balance and limit the axial displacement of
the shaft, a bearing that can withstand the axial load in the other
direction needs to be installed at the other support.
Bearing code: 0
Application:
Single row angular contact ball bearings: machine tool spindles,
high-frequency motors, gas turbines, centrifugal separators, small
car front wheels, differential pinion shafts, booster pumps,
drilling platforms, food machinery, indexing heads, repair welders,
Low-noise cooling tower, electromechanical equipment, painting
equipment, machine tool slot plate, arc welding machine
Double row angular contact ball bearings: oil pumps, roots blowers,
air compressors, various transmissions, fuel injection pumps,
printing machinery, planetary reducers, extraction equipment,
cycloid reducers, food packaging machinery, electric welding
machines, electric soldering irons, Square box, gravity spray gun,
wire stripping machine, half shaft, inspection and analysis
equipment, fine chemical machinery
model | dimensions(mm) | weight(kg) | ||
d | D | B | ||
7209C | 45 | 85 | 19 | 0.406 |
7209A5 | 45 | 85 | 19 | 0.402 |
7209A | 45 | 85 | 19 | 0.41 |
More products
1) Deep Groove Ball Bearing:
In deep groove ball bearing, we can provide with different
material: GCR15, Ceramic, Stainless steel, Carbon steel.
Series: 6000 series, 6200 series, 6300 series, 6400 series, 6900
series, 16000 series..
Also we can provide high temperture deep groove ball bearing such
as S1, S2, S3.
2) Agular Contact Ball Bearing.
In angular contact ball bearing we have brass cage, steel cage and
nelon cage.
Single row angular contact ball bearing: 7000 series, 7200 series,
7300 series.
Double rwo angular contact ball bearing: 300 series, 3200 series,
3300 series.
Suffix: BECBM, BEP, ACM, AC, C, CETA
3) Cylindrical Roller Bearing:
Single row: NJ, NU, NUP, NUB series
Double row: NNU series.
Four row: FC series
Full complement : SL series.
4) Spherical Roller Bearing:
20000 series, 22000 series, 23000 series, 24000 series.
Brass cage: CC, CA, CAK.
Steel cage: EK
We also can supply sealed spherical roller bearing.
5) Taper Roller Bearing:
Single Row: 30000 series, 32000 series, 33000 series.
Double Row: D, CD.
Inch taper Roller Bearing: 68149/10 69349/10 68548/10 67048/10
etc,,,
6) Needle Roller Bearing:
HK, NA, NK, RNA, NUTR, K, BK Series.
7) Linear Bearing:
LB, LBE, LMU, LMUE series.
8) Auto Bearing.
We also always supply auto bearings such as hub wheel bearing, DAC
series.
9) Water Pump Bearing
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory. Welcome to visit our factory.
Contact:
Suzi Ding:
Whatsapp no.+8613210850273