Home Companies Zhiwang New Energy

PET Solar Panel ZW-40090-P Strip Solar Photovoltaic Panels 6V Semi-flexible Solar Panels 5W

Zhiwang New Energy
Active Member

Contact Us

[China] country

Address: No. 60-1, Xinyang Road, Tangjiazha Village, Ditang Street

Contact name:Constantine Chou

Inquir Now

Zhiwang New Energy

PET Solar Panel ZW-40090-P Strip Solar Photovoltaic Panels 6V Semi-flexible Solar Panels 5W

Country/Region china
City & Province xinyang jiangsu
Categories Batteries
InquireNow

Product Details

1.jpg

 2.jpg

-_03_.jpg
 

PET Solar Panel ZW-40090-P Strip Solar Photovoltaic Panels 6V Semi-flexible Solar Panels 6.7W6V

 

Model:ZW-40090-P
Brand:Zhiwang
Size:400mmx90mmx2.2mm
Battery:12
Peak power:67W
Max voltage:6V
Max current:1.2A
Open voltage:6.6V
Short current:1.5A
Weight:400g
Raw Material:

Poly Mono Crystalline Silicon

or Mono Crystalline Silicon

Epoxy Adhesive

or PET

Printed Circuit Board (PCB)

Glass Fiber Material Base Plate

Customizable

Operating Temperature(°C)-40°C ~ + 85°C
Maximum System Voltage8V(UL)/10V(IEC) DC
Maximum Rated Current Series2A
Temperature Coefficients of Pmax-0.435%
Temperature Coefficients of Voc-0.35%
Temperature Coefficients of Isc0.043%
Nominal Operating Cell Temperature47+/-2°C
Standard Testing Conditions:

AM1.5 E=1000W/m2 T=25℃ Luminous intensity: 38000Lux

Test ambient temperature 25 ° C ±2 ° C
The humidity of the test environment is 60%-70%
Light intensity 40*1000 LUX
The vertical distance of light is 30cm
Open-circuit test multimeter
Load the test dedicated test stand
Application battery charging
Storage environment 20cm above the ground;

Humidity of 60% 70%; The normal temperature

Operating temperature:-40°C to +85°C
NOCT48°C+/-2°C
Warranty PeriodReplacement for manufacturing defects within 3-5 years
CertificatesCE, RoHS, EMC
Current temperature coefficient%/K0.06+/-0.01
Voltage temperature coefficientmV/K-(78+/-10)
Power temperature coefficient%/K-(0.5+/-0.05)

 

Zhiwang New Energy's solar panel module with high efficiency solar PV module adopts the worlds highest efficiency cell with efficiency up to 21%, and efficiency of the module is 25%-30% higher than the traditional ones.
This cell's positive pole and the negative pole are on the same side, the cell's front side can absorb maximum sunlight, so that it can get the maximum power.

 

Features
1. High cell efficiency with quality silicon materials for long term output stability;
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures;
3. Used in glass laminated solar panels high transmittance low iron tempered glass or with enhanced stiffness and impact resistance;
4. Epoxy resin sealant materials with high transparency, high hardness and high strength are used in epoxy resin sealant solar panels;
5. In PET semi-flexible solar panels, high light transmittance, high hardness and high strength PET surface materials are used.
6. Excellent electrical performance at high temperature and low irradiance;
7. Can be widely used in decorative lights, electric toys, electronics, gifts and other industries;
8. Voltage, power, material, size and shape can be customized;
9. The products are widely used in solar lighting, lamps, household electricity, transportation, communications, meteorology, construction and photovoltaic power stations and other fields.
10. High quality solar cell, high solar energy conversion efficiency, up to 35%.
11. Monocrystalline or polycrystalline silicon solar cells are available.
12. Transparent low iron tempered glass and anodized alumina frame used in glass laminated solar panels ensure the modules work in extreme outdoor environments.
13. Glass laminated solar panels have a service life of up to 15 years. PET solar panels have a service life of up to 5 years; Epoxy rubber solar panels have a service life of 1-3 years.
14. Strict quality control, in line with the highest international standards;
15. Two professional plants of Zhiwang New Energy manufacture world-class products in accordance with iso9001:2008 (Quality management system) certification;

 

Quality Assurance Test
Thermal cycling test (provided by the supplier of floor material and surface material)
Thermal shock test (provided by the supplier of floor material and surface material)
Heat/freeze and high humidity cycle test (provided by the supplier of floor material and surface material)
Electrical isolation test (laboratory simulation data)
Hail impact test (laboratory simulation data)
Mechanical, wind and torsional load tests (laboratory simulation data)
Salt spray test (provided by the supplier of floor materials and surface materials)
Light and water exposure tests (laboratory simulation data)
Wet CO2 / SO2 (laboratory simulation data)
Test ambient temperature 25 ° C ±2 ° C
The humidity of the test environment is 60%-70%
Light intensity 40*1000 LUX
The vertical distance of light is 30cm
Open-circuit test multimeter
Load the test dedicated test stand
Application battery charging
Storage environment 20cm above the ground; Humidity of 60% 70%; The normal temperature
Working environment -20℃ - +85℃

 

Yuyao Zhiwang.png 20190807_.png

-_3.jpg

 5.png

Q. Are you a manufacturer or a trading company?

A. We are two factories in Yuyao,Zhejiang and Xuzhou, Jiangsu, with OEM& ODM& Customization available.

Q. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our Rohs and CE High Efficiency Epoxy Resin Solar Panel ZW-40090-P Strip Solar Photovoltaic Panels 6V sample.

Q. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q. What is your terms of delivery?
A: EXW, FOB, CIF. And other accepted payment method.
Q. How about your delivery time?
A: Generally, it will take 15 to 30 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your Rohs and CE High Efficiency Epoxy Resin Solar Panel ZW-40090-P Strip Solar Photovoltaic Panels 6V order.
Q. Can you produce according to the samples?
A: Yes, we can produce by your Rohs and CE High Efficiency Epoxy Resin Solar Panel ZW-40090-P Strip Solar Photovoltaic Panels 6V samples or technical drawings. We can build the molds and fixtures.
Q. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery Rohs and CE High Efficiency Epoxy Resin Solar Panel ZW-40090-P Strip Solar Photovoltaic Panels 6V.

Q.How many years for warranty?

A: Our warranty is 3 -5 years for our Rohs and CE High Efficiency Epoxy Resin Solar Panel ZW-40090-P Strip Solar Photovoltaic Panels 6V.

 

Hot Products

0.35W Poly ROHS Mini Epoxy Solar Panel ZW-5353 Outdoor Customized Solar Panel Charger 5V Model: ZW...
Wholesale Epoxy Solar Panels ZW-5757 Poly Solar Panel 0.37W Waterproof Epoxy Mini Solar Panel Model: ...
Product Description 6.5W High Efficiency Epoxy Resin Solar Panel ZW-390100-P Strip Solar Photovoltai...
0.23W High Efficiency Epoxy Resin Solar Panel ZW-74529 Portable Solar Laptop Charger 5V Mini Solar ...
High Quality Mini Epoxy Resin Solar Panel ZW-6565-5.5V Customized Size Poly Crystalline Solar Cell 0...
ZW-5545-5V Mono Solar Panel Charger 0.4W Customized Epoxy Mini Solar Panel 5Volt Model: ZW-5545-5V ...