Home Companies Suzhou Delfino Environmental Technology Co., Ltd.

Peracetic Acid Sensor 60℃ Water Quality Probe Tolerate Surfactants

Suzhou Delfino Environmental Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Suzhou Xupai Road No.3

Contact name:Yuki Fu

Inquir Now

Suzhou Delfino Environmental Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Peracetic Acid Sensor 60℃ Water Quality Probe Tolerate Surfactants

Country/Region china
City & Province suzhou
Categories Optical Instruments
InquireNow

Product Details

 

Peracetic Acid Sensor 60℃ Water Quality Probe Tolerate Surfactants

 

 

Descriptions

 

The water quality probe peracetic acid sensor P9.2 is used for the measurement of peracetic acid C2H4O3, surfactants, and lead acids are tolerated. You can calibrate the sensor via analytical determination by DPD-method at the controller. The pH range of the peracetic acid probe is 1 ~ 6pH. The temperature range of the sensor is from 0℃ to 60 ℃. The material of the peracetic acid sensor is PEEK, stainless steel 1.4571.

 

About the interference: ClO2 increases the measuring value, H2O2 very low influence on the measuring value, reduces the PES signal, O3 increases the measuring value greatly.

 

 

Specifications
 

Product NamePeracetic acid sensor water quality probe
Product ModelPeracetic acid sensor P9.2
pH Range1 ~ 6
Pressure Range 0 ~ 1bar, no pressure surges or fluctuations
Temperature Range

0~ 60℃

Response Time
T90 3.5 min at 10 °C,45 s at 50 °C

Connection

For mA-version 2-pole terminal, M12 male or Modbus RTU with M12 male

Shaft Length

Standard 175 mm, and up to 220 mm in length (mA-Version)

Material

PEEK, stainless steel 1.4571

Flow Rate

30 L/h, low flow-dependence

 

 

Applications Of The Peracetic Acid Sensor

 

Freshwater, all types of water treatment.

Lead acids: up to 1% sulfur, saltpeter, and phosphoric acid have no influence on the measuring results.

Surfactants are tolerated.

 

 
Advantages Of The Peracetic Acid Sensor
 
The peracetic acid sensor water quality probe has a wide temperature range from 0℃ to 60℃. The temperature compensation is automatical, by an integrated temperature sensor.
 
Peracetic acid sensor P9.2 tolerate surfactants. The run-in period at first start is 30~180 min. The response time T90 about 3.5min at 10℃, about 45s at 50℃.
 

 

 

Scope Of Supply

 

Water quality probe peracetic acid sensor P9.2: sensor, membrane cap, electrolyte.

 

 

Ordering Data:
 

Type

Measuring range(ppm)

Resolution(ppm)

Output signal

Power supply

Item number

P9.2H-M0c

0.0 ~ 200.0

0.1

Modbus RTU

9 ~ 30 V DC
20 ~ 56 mA

3426130

P9.2N-M0c

0 ~ 2000

1

3426131

P9.2L-M0c

0 ~ 2 % (20000) 

0.001 % (10)

3426132

P9.2-MA-200

0.0 ~ 200.0

0.14 ~ 20mA

12 ~ 30 VDC

RL 50 ~ 900Ω

3426100

P9.2-MA-2000

0 ~ 2000

1

3426101

P9.2-MA-2%

0 ~ 2 % (20000)

0.001 % (10)

3426102

P9.2-MA-200-M12

0.0 ~ 200.0

0.14 ~ 20mA

12 ~ 30 VDC

RL 50 ~ 900Ω

3426100

P9.2-MA-2000-M12

0 ~ 2000

1

3426101

P9.2-MA-2%-M12

0 ~ 2 % (20000)

0.001 % (10)

3426102

 

If you are interested in the water quality probe peracetic acid sensor P9.2, please contact us.

 
 
 

Hot Products

Amperometric Chlorine Sensor Free Chlorine Probe Used In Drinking Water Descriptions Chlorine sensor ...
Chlorine Dioxide Sensor 12pH Water Quality Sensor With Open Measuring Cell Descriptions Chlorine ...
Peracetic Acid Sensor Water Quality Sonde 6pH Flow Rate 45L / H Descriptions The water quality sonde ...
Analog Two SPST Relays IP66 PH ORP Controller For Water Treatment Monitoring The APX1-C1A/C1D PH ORP ...
Two 0/4~20mA Outputs PH ORP Transmitter For Industrial Process Monitoring The APX1-C2A/C2D PH ORP ...
Two SPST Relays RS485 Modbus PH ORP Meter For Dosing Control The pH ORP controller APX1-G2A is an ...