|
[China]
Trade Verify
Address: Room 401,Unit 1,Building 6,Kecheng Kechuang Yuan,No.1500 Wenyi Xi Road,Cangqian Street,Yuhang Area,Hangzhou City,Zhejiang Province,China
Contact name:Wei
Hangzhou SED Pharmaceutical Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
Pharmaceutical Capsule Filling Machine 400 Holes For Powder And Pellets
Product description of Capsule Filling Machine
SED-400J-H Automatic Capsule Filling Machine is commonly used in the pharmaceutical, nutraceutical industries to fill empty hard gelatin capsule of various sizes with powders and pellets (optional). The capsule filler automatically orientates, opens the empty hard gelatin capsule, properly fills the capsule with powder, and automatically closes the capsules.
Main Parameter of Capsule Filling Machine
| Model | SED-400J-H |
| Capacity | 400 capsules/min |
| Filling Material | Powder, Granules |
| Die Hole Number | 3 |
| Power Supply | 380V 50Hz 3P |
| Total Power | 3.75KW |
| Application | 00#-4# capsule |
| Filling Variation | ±3% - ±4% |
| Noise | ≤78dB(A) |
| Qualified Rate | ≥99.5% |
| Overall Dimension | 800mm (L) x 970mm(W) x 1870mm(H) |
| Weight | 600kg |
Characteristic of Capsule Filling Machine
1) This machine runs as per automotive separating revert interval,
feeding,removing useless capsule, clipping and coming capsule,
cleaning mould are completed at same time, which has reach high
precision and low noise levels
2) With the automatic controlled, the speed can be adjusted by
frequency conversion. Digit display, the machine is easy to operate
3) This machine is with good suitability, high frequency for
filling Chinese and western medicines. Which adopted more hole type
working principle, exact calculating, the difference of packing are
more advanced than its standard of governments pharmacopoeia
4) It is equipped with safety protection unit for people and
machine. It can be automatically stopped when the material used up.
It is good equipment for a pharmaceutical manufacturer
Working Principle of Capsule Filling Machine
The working principle of the automatic capsule filling machine is
divided into two parts, which are the movement of the capsule and
the filling of the medicine:
1. Movement of the capsule
During the filling process of the intermittent capsule filling
machine, the movement of the capsule depends on the indexing box
for intermittent and discontinuous rotation. The filling volume of
the capsule is mainly determined by the volume of the metering disc
hole. The hollow capsule is in the capsule hopper, the main board
moves up and down, the capsule enters the capsule
guide groove by its own gravity, and then the horizontal fork and
the vertical plug are used to make the capsule cap upward and the
capsule body downward into the upper and lower modules. The capsule
body and capsule cap are separated under the action of the device,
and then the module enters the powder filling station.
2. Drug filling
The sensor in the powder holding ring controls the screw feeding
rod above it, and the medicine is continuously added to make the
height of the powder in the powder holding ring constant. position,
push the drug column into the capsule body. After that, it
enters into the capsule rejection, capsule locking, finished capsule discharge, and module cleaning stations in turn, and then enters a new round of station cycle, and the cycle begins again and again.
Product Details
Application of Capsule Filling Machine
