|
[China]
Trade Verify
Address: 28th,Jiuan Rd,Jiuli Industrial Zone,Shangwang. Ruian city,Zhejiang,CHINA
Contact name:Chan
Leadtop Pharmaceutical Machinery |
|
Verified Suppliers
|
|
|
Wholesales Automatic Horizontal Face Mask Carton Box Packing Machine
ZH Series Boxing Packing Machine is automatic high speed continuous cartoning machine which is high performance product incorporates pneumatic, photo, electric, mechanic in one. It suitable for automatic inserting ALU-PVC blister, bottle, soft tube, soft AL/AL strips and pouch into carton, also can link to matching machine to form production line.
Technical Parameters
| Description | Automatic cartoning machine |
| Model | ZH-Series Cartoning machine |
| Speed | 50-80 boxes/min |
| Carton specification | Paper material 250-400g/m2 ( need flat surface) |
| Box size L*W*H(100-240)*(15-150)*(25-85)mm | |
| Power supply | 220V/380V,50HZ. Main motor 1.5kw |
| Dimension | 3600*1200*1700mm( L*W*H) |
| Weight | 1300kg |
| Air supply | ≥0.6Mpa |
| Air consumption | 20m3/H |
| Glue machine | China Jingtai(optional ) |
Maintenance and inspection
1. Maintenance and clean for machine every day or every shift.
(1) Clean the machine each time after packaging.
(2) Turn off the power before cleaning the machine to low the
temperature of heating part.
(3) Never spray the water or steam directly on the machine when
cleaning.
(4) Main components to be cleaned:
* Remove the product chips store up in the conveyance line of the
product by compressed air or in other way.
* Brush off the film chips adhered to the sealing surface by the
wire brush applied with the silicone oil.
* Clear the dirt on the control panel, safety cover and operating
surface by a piece of soft cloth.
* Conductive ring of the mid sealing tool and end sealers: clean it
once a week or two weeks. Clean the conductive ring by the back
of the sandpaper with the master power off.
2. Maintenance and clean for machine every month.
(1) Apply the lubricating grease on the bearing of the end sealers.
(2) Apply the lubricating grease on the gear and chain (pulley) of
the driving unit.
(3) Check the tightness of the chain and belt of the driving unit,
and tighten the loosed one.
(4)Check the tightness of the fastening screw or nut of all parts,
and tighten the loosed one.
3. Relevant inspection for machine once a half year.
(6) Check the wear intensity of the belt of the driving unit, and
replace the worn-out one.
(7) Check the wear intensity of the rubber roller, and replace the
one affecting the film advancing effect.
(8) Properly adjust the brake unit of the film-carrying roller.
(9) Check all wearing parts, and immediately replace the damaged
one.
Check the fastness of the wiring on the electrical terminal plate,
and tighten the loosed one. Check the inverter, programmable
controller and circuit board, and remove the dust or dirt on them
by the compressed air.
