Active Member
|
[China]
Address: LTPM CHINA 2nd Floor,Dongxin Road and 5th Development Road ,Caizhai Industrial Zone, Ruian City, Zhejing Province ,China
Contact name:Chan
Leadtop Pharmaceutical Machinery |
|
|
Product Description:
This equipment can be used for herbal. Plant, food's decoction, warm soaking, heat reflux, forced circulation, permeability percolation, aromatic oil extraction and organic solvent recovery process under atmospheric pressure or pressure. It has advantage of high efficiency and easy operation. Therefore,it is widely used in pharmaceutical,food, chemical and other industries. This equipment's extraction technique can choose straight cylinder, cone, oblique cone, mushrooms and other forms.
Feature:
1. This equipment has excellent performance with perfect
manufacture, complete collocation, and simple operation. It is
specially suitable for the small batch multi-variety production.
2. Consist: Vacuum pump, liquor, filter, fluid bath, control box
and other necessary accessory. The equipment divides into steam
heating and electric heating. The equipment can be used once
connect with water, electricity or the steam.
3. It is suitable for water-extraction and alcohol-extraction. It
can extract under normal pressure and negative pressure and recycle
volatile oil. It equips with vacuum switch and control box, easy
for operation. It can realize the normal temperature extraction and
low temperature concentration.
4. Electric heating structure is with advanced design, high
efficiency safety, homogeneous heating. On the pot has the security
decompress to ensure the use security.
5.Realize circumfluence extraction, reduce
extraction&concentration time, save solvent.
6. Oil-water separator is with unique design. The material is
glass, it is easy for observation.
Main Technical Data:
| Manufacturer | China LTPM Group Co., LTD | ||
| PN | 5L vacuum emulsifying mixer | ||
| Capacity | Design volume: 6L, working capacity:5 L | ||
| Kettle Cover | Liquid(particle)inlet, sunk material inlet, air inlet with filter, inspect light and sight glass, vacuum port, pressure meter(1 to -0.1 bar), pressure clamp | ||
Mixing pot |
Material | Inner layer: SUS316L thickness: 3mm | |
| Middle layer: SUS304 thickness: 2mm | |||
| Outside layer: SUS304 thickness:2mm | |||
configuration | Bottom material exhaust, size: 1.5” | ||
| Temp. sensor (0-199℃) | |||
| Electrical heating: 2kw, cooling water inlet | |||
Stirring system |
Homogenizer | 1.Material: SUS316L; standard homogenizer 2. Power: 1.1 kw/380/50Hz; RPM: 0--2800R/Min | |
| Stirring scrap and middle stirring | Material: SUS316L,Scrap material: PTFE | ||
1. Stirring scrap and middle stirring use the same motor 2,Power:0.75 kw/380V/50Hz;RPM:0~86r/min(Frequency control) 3. Stirring scrap and middle stirring rotating the opposite direction | |||
| Safety: 1. During stirring, the cover can not open, 2. Cover lift can not stirring. | |||
| Vacuum system | 1. Vacuum pump: water recycle, power 0.37kw/380V/50Hz 2. With pressure sensor (during vacuum condition, hydraulic can not open) | ||
| Heating method | Jacket electrical heating | ||
| Exhaust method | Electric doom and bottom discharge or positive pressure discharge material | ||
| Pressure | Pressure in the pot during working: -0.090 Mpa; Jacket working pressure:0.2 Mpa | ||
| Control box | SUS304 , 1.2mm thickness | ||
| Dimension | 1400mm×600mm×1900~2400 mm | ||
| Shelf is SS, platform with raised platform and SS guardrail | |||
| Spare parts | One year spare parts and tools | ||
| Guarantee | One year | ||
| Using life | More than 15 years | ||
Oil pot | Design volume | 3.35L |
| Working capacity | 2.7L | |
| Stirring power | 0.025kw | |
| Stirring speed | 1400 RPM | |
| Heating power | 1 Kw | |
Water pot | Design volume | 3.35L |
| Working capacity | 2.7L | |
| Stirring power | 0.025kw | |
| Stirring speed | 1400 RPM | |
| Heating power | 1 Kw |
Machine Picture:
