Outdoor Decorations Stainless Steel Perforated Metal Mesh 0.8-100mm Hole Dir

Outdoor Decorations Stainless Steel Perforated Metal Mesh 0.8-100mm Hole Dir

The Product Description:

Perforated metals are used for filtration, safety, and decorative applica­tions. Perforated metal comes in many hole sizes and patterns. The holes can be round, square, rect­angular, slotted, or decorative. There are many standard patterns, but custom patterns are also available.

Perforating can reduce the weight of a piece of metal without affecting its strength too adversely. Perfo­rated metals have greater structural strength than expanded metals of comparable thickness.

Stainless Steel Perforated Sheet T-304 also known perforated screen, is an excellent choice for its tensile strength, high resistance to corrosion, and high fabrication ability. Its perforated quality saves weight, allows for the passage of light, liquid, sound, and air, as well as adds aesthetic appeal.

Three material types of perforated stainless steel sheets:

According to the crystalline structure of perforated stainless steel, it can be classified into three types: Austenitic, Ferritic and Martensitic.

> Austenitic steel, containing high content of chromium and nickel, is the most corrosion resistant steel providing incomparable mechanical properties, thereby, it becomes the most common type of alloy, accounting for up to 70% of all stainless steel production. It is non-magnetic, non-heat-treatable but it can be successfully welded, formed, meanwhile being hardened by cold-working.

• Type 304, composed of iron, 18 - 20% chromium and 8 - 10% nickel; is the most common grade of austenitic. It is weldable, machinable for various applications, except in salt water environments.
• Type 316 is made of iron, 16 - 18% chromium and 11 - 14% nickel. Compared to type 304, it has better corrosion resistance and yield strength with similar weldability and machinability.

> Ferritic steel is straight chromium steel without nickel. When it comes to corrosion resistance, the ferritic is better than martensitic grades but inferior to austenitic stainless steel. It is magnetic and oxidation resistant, additionally; it has perfect working performance in marine environments. But it cannot be hardened or strength by heat treatment.

• Type 430 features high resistance to corrosion from nitric acid, sulfur gases, organic and food acid, etc.

> Martensitic steel, same as Ferritic steel, is chromium steel with no nickel. It is magnetic and heat-treatable. It features the highest hardness among all stainless steel products for applications where hardness, strength and wear resistance are required due to higher levels of carbon.

• Type 410 contains lowest alloy content when comparing to other martensitic steel.

Here is the stainless steel sheet (304) specifications:

We has had the ability to perforate for several years. Whether a simple round hole pattern or a complicated multi tool pattern we has the ability to perforate to customer requests and specifications.

Properties:

perforated, excellent weight-bearing properties, high corrosion resistance, superior durability, high strength-to-weight ratio, fair resistance to thermal and electrical conductivity, ease of fabrication, hardenable by cold working, and non-magnetic.
 
Stainless Steel Perforated Metal is used in the manufacture of:

1. Basket Strainers

2. Duplex Strainers

3. Feed Distributors

4. Hammer Mill Screens

5. Strainers

6. Tee Strainers

7. Temporary Strainers

8. Trommel Screens

9. Vibrating Screeners, round and rectangular, & replacement screens and parts

10. Y-Strainers

Please note:

1. Stock sheets are available in a standard size (2440mm x 1220mm) unless identified.

2. All dimensions are in millimeters and are nominal.

3. End of sheets are cut through perforations (nil margins).

4. Borders are available through Locker Group’s custom made perforation service.

5. Locker Group reserves the right to make technical changes without notice.