Tangyin Taixing Engineering Plastics Co., Ltd. |
|
Corrosion Resistance Engineering Plastic Port Pier Shield UHMWPE
Dock Bumper Facing Pad
Marine Fenders Pad is made from UHMWPE (ultrahigh
molecular weight polyethylene ) which has been used for years by
marine manufacturers worldwide. It’s an extremely durable material
They're usually fixed to the panel using stainless steel screws
that are screwed into the skin of the steel panels.
PE Marine Fenders Feature:
1.Low water absorption and not affected by temperature;
2.Light, anti-impact, corrosion resistance, anti-ultraviolet ray,
aging resistance, low friction, non-pollution, which is a good
material for fender face pad;
3.Stable chemical property and can endure the corrosion of all kind
of corrosive medium and organic solvent in a certain range of
temperature and humidity;
4.Superior impact resistant, noise-absorption and
vibration-absorption.
.
Product Specification:
Marine fenders typically operate as a group of single units where
the type, location and density of their installation or deployment
depends on several factors including their technical
specifications, berth structure, ship type, etc.
Product Name | Plastic Port Pier Shield UHMWPE Dock Bumper Facing Pad |
Material | ultrahigh molecular weight polyethylene |
Size
| |
Thickness | 5-200 mm |
Density | 0.94-0.98 g/cm3
|
Water Absorption | <0.01% |
Impact Strength | |
Compressive Strength | ≥42 Mpa |
Friction coefficient | 0.11-0.17 |
Ship fender panels are processed from ultrahigh molecular weight
polyethylene (UHMWPE) material, which has an extremely low
coefficient of friction and excellent wear resistance, uv and ozone
resistance, corrosion resistance and will not rot or crack when
soaked in water for a long time.
Application:
Because of the advantages, HDPE plastic Fender Panel is widely used in the world’s major ports and
wharves.
1. Ships in the harbor
2. Chafing plate
3. Trucks drive piles first
4. Floating wharf
5. Slide the wall fender
6. Protection of quaywall
7. Protection of piles
FAQ:
Q1: Are you a manufacturer or a trading company?
we are real manufacturer of Polyethylene Products, our factory
located in Tangyin of China, we welcome customer from all over the
world to visit us and build longer term business.
Q2. Can I have a sample order for fender pad?
Yes, we welcome sample order to test and check quality.
Q3. What about the lead time?
1) 2--3 days for sample.
2) 20--30 days for mass production. If urgent,we have green
channel.
Q4. Do you have any MOQ limit for fender pad order?
Low MOQ, 1pc for sample checking is available.
Q5. Is it OK to print my logo on UHMWPE fender product?
Yes. Please inform us your logo or design before mass production.