1-3T 37KW Waste Wood Crusher Wood Chips Biomass Particle Bark Sawdust Crusher

1-3T 37KW Manufacturer Customized Waste Wood Crusher Wood Chips Biomass Particle Crusher Bark Sawdust Crusher

Product Description:

The wood crusher can directly crush branches and trunks. The crushed products can be used in many places. For example, the crushed wood chips can be used as culture media, and sawdust can be processed into charcoal and other energy sources that can be recycled.
 

Instructions for use of wood crusher:

1. Turn on the power and check whether the steering is correct.
2. When installing and replacing the tool, the knife edge extends 2-4mm out of the cutterhead plane, and then tighten the bolts. If the thread of the pressure bolt is found to be worn, it should be replaced immediately to prevent damage to the cutterhead nut.
3. To change the telescopicity of the knife, the length of the knife must be consistent.
4. When the particle size cannot reach the ideal level by adjusting the knife length, replace the sieve with different apertures.
5. It is strictly prohibited to put wood with stones or nails into the machine to prevent damage to the knife and internal parts.
6. Pay attention to check the hammer bolts. If they are loose, tighten them immediately. If the hammer and bolts are seriously worn, they should be replaced.

Applicable materials:

The wood crusher is suitable for crushing materials such as branches, bamboo powder, fruit shells, Chinese herbal medicines, bark, leaves, wheat bran, konjac, rice husks, corn cobs, straw and other materials. It is Ideal crusher in chemical industry, building materials, medicine, health care, breeding, food, mosquito coils and other industries. (Note that the wood crusher is not suitable for crushing

Company Profile 
 
Zhongdebao was established in 1998, specializing in R&D, production and sales of feed pellet machine ,wood pellet machine, pet/fish feed pellet machine. In short, it is a company integrating R&D, manufacture, sales, installation and all kinds of service.

 
FAQ
 
Question 1: Can we customize our logo/website/company name on the machine?
A: Of course, we offer OEM and ODM service.
Question2 : How long is your warranty time ?
A: One year(Calculated from the equipment arriving the customer’s side.). After this period, we will definitely provide you with great support whenever you need. In a word, you will be welcome to contact us with any problems.