6 4/5in Directional Drill Bit Soft Formation 1308 Steel Body PDC

6 4/5inch Directional Drill Bit Minning PDC Diamond Drill Bit

Characteristics:

1. The crown surface of the bit is a flat polishing surface, which is suitable for hard and non abrasive formation. It can be used for strong directional operation with good directivity.

2. The top surface of the drill bit is a shallow cone surface, which has strong guidance, good cleaning effect and strong aggressiveness. There are 4 water holes on the surface, which is conducive to removing cuttings at the bottom of the well.

3. The bit is inset by PDC cutters in anticlockwise and interlaced way so that the cutters can cut any area of the well with good cutting effect.It also reduce the quantity of the bits used to drill one hole. And the bits are in a high speed and more stable.

4. The composite sheet with high impact resistance is used to evenly distribute the teeth, and the back inclination angle is controlled at 13°-16°. The type of the composite sheet is 1308, which has strong aggressiveness.

5. The blades of this bit are designed as microscale spiral. The gauge surface is inset/inlaid by PDC cutter gauge teeth to enhance the abrasive resistance and improve the gauge effect.Therefore, the cutters can be fully used to improve the stability of the bit.

Package&Delivery
Our drills will ship within 5 days after 50% full payment is confirmed. The drill bits will be shipped by sea or air as your request. And if you have any other questions, please contact us freely. Thanks!

 
Our Principle
We adhere to the principles of high quality, high quality service, and innovation. We also insist on providing efficient products and quality services. If you are interested in our drills, please feel free to contact us. We are looking forward to cooperating with you!

FAQ