|
[China]
Trade Verify
Address: 3rd Floor,Building A,Sha Tang Bei Fang Yong Fa Industrial Area,Sha Jing, Bao an, Shenzhen, China
Contact name:Rudi Jin
Shenzhen Hansome Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Adhesive Roller and Disc Brush Single Side PCB Surface Cleaning Equipment
Machine introduction
This machine is a automatic single side PCBA cleaning machine, using roller brush and disc brush combined cleaning. It's an full-automaticit inline-PCBA board cleaning machine, suitable for traditional board washing solvent, don't need the operator touch the cleaning agents. This equipment combine the traditional board transporting technology and the brush cleaning technology, clean the PCBA in all sides, front, back, left and right side,without the cleaning dead corners, which fully ensure the cleanliness of PCBA. Suitable for cleaning the single-sided soldering surface PCBA boards,won't wetting the front components.
Features
1, Special design machine structure, stable working and good
performance.
2, It is specially used for the cleaning of tin beads, flux marks
and scratches.
3, Using high end plam fibre brush,anti-static, will not generate
static electricity and will not damage PCBA board.
4, Suitable for PCB boards with edges (minimum distance between
board edges is 1.5mm), and the PCBA board width adjustment.
5, Thickened spring claws ensure that the PCBA board will not move
during the transportation.
6, Automatic cleaning solvent coating system: ensure the soldering
surface of the PCBA board can be evenly coated with washing water
without affecting the surface of other parts.
7, Disk brush and two rollers brush cleaning,which ensure the PCBA
board is cleaned in all directions without dead corners.
8, The cleaning brush height and rotation speed can be adjusted to
meet different cleaning requirements.
9, The waste generated from after working is automatically
collected in the filter box at the bottom of the machine for easy
cleaning.
10, The machine connect with AC220V, driven by high-quality
electronic speed-regulating motor, the speed of the motor is
infinitely adjustable and durable.
11, Using module control, brand electrical parts, and stable
control system.
12, SMEMA signal compatible.
Specification
| Model: | HS-7000 | HS-7100 | HS-7200 |
| Max PCBA size: | 200mm(W) x 200mm(L) | 300mm(W) x 300mm(L) | 500mm(W) x500mm(L) |
| Machine size: | L1750*W670*H980±2mm | L1750*W770*H980±2mm | L2150*W970*H980±2mm |
| Coating roller size: | φ95mm | φ95mm | φ95mm |
| Disc brush size: | φ200mm | φ320mm | φ520mm |
| Spindle speed: | 0-500 R/Min(CVT) | 0-500 R/Min(CVT) | 0-500 R/Min(CVT) |
| Working voltage: | 220V 50HZ | 220V 50HZ | 220V 50HZ |
| Total power: | 0.9(KW) | 1(KW) | 2.2KW) |
| Transport speed: | 0.05～1.8m/min(CVT) | 0.05～1.8m/min(CVT) | 0.05～1.8m/min(CVT) |
Control system
Control modes: manual operation / intelligent economic operation
①Manual operation mode: each system function can be completed
manually one by one
② Intelligent economic operation mode: When there is no PCBA board
transportation rail, the system will automatically make a judgment
and the cleaning brush and the pump will stop working. The cleaning
solvent circulation system is fully enclosed.
