|
[China]
Trade Verify
Address: 3rd Floor,Building A,Sha Tang Bei Fang Yong Fa Industrial Area,Sha Jing, Bao an, Shenzhen, China
Contact name:Rudi Jin
Shenzhen Hansome Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
GKG SMT Solder Paste Stencil Printing Machine with Drip Cleaning Function
Introduction
The G9+ Automatic solder paste printing machine is a high-end machine for SMT high-end application, the width of GT++ BTB is only 2830mm, can perfectly satisfy the printing process requirement of 03015,2025 pitch, high precision and high speed.
Specification
| Model | GT++ |
| Max PCB Size | 510x510mm |
| Min PCB size | 50x50mm |
| PCB thickness | 0.4-6mm |
| Max board weight | 5kg |
| Transport height | 900±40mm |
| Board edge gap | 2.5mm |
| Board height | 23mm |
| Transport direction | L-R,R-L |
| Transport speed | max 1500mm/s, program control |
| Transport method | One stage |
| PCB positioning (support method) | Magnetic pin/support block/auto up-down table |
| PCB clamping system | Patented over the top clamping |
| Side clamping | |
| Adsorption function | |
| Print snap-off | 0-20mm |
Print mode | one/twice |
Print Speed | 10-200mm/sec |
Print Mode | One /Twice |
Squeegee Type | Rubber /steel Squeegee Blade(Angle 45°/55°/60°) |
| Print pressure | 0.5-10kg |
| Template fram size | 470*370mm~737*737mm(20-40thickness) |
Cleaning System | Droops of rain type cleaning system |
| Dry, wet vacuum three modes | |
| Back and forth cleaning | |
CCD FOV | 10x8mm |
| Fiducial mark types | Standard Fiducial mark shape |
| Pad | |
| Hole | |
| Camera system | Look up/down optics structure |
| CCD digital camera | |
| Geometry pattern match |
Machine Performance
| Model | GT++ |
| Repeat position accuracy | ±12.5um@6,CPK≥2.0 |
| Print accuracy | ±18um@6,CPK≥2.0 |
| Print cycle time | ＜7.5 sec |
| Based on the third party test system(CTQ) verify the actual solder paste printing position repeat precision | |
Whole Machine Specification
Power supply | AC:220±10%,50/60HZ, 3.0KW |
Air pressure | 4~6 kgf/cm² |
Air consumption | around 5L/min |
Operating temperature | -20℃~+45℃ |
Operating humidity | 30%~60% |
Machine Dimensions(without tower light) | 1240(L) x 1410(W) x 1500 (H)mm |
Machine Weight | Approx: around 1100Kg |
Features
1, CCD digital system, total new optical path system, uniform circular light and high brightness of coaxial light source. With both light source system, brightness can adjust to an infinite loop, allowing different mart point can be easily recognize (including uneven mark point) such as tin plating, copper plating, silver plating, hot air soldering, FPC and various types of different PCB color.
About Packaging
