Active Member
|
[China]
Address: No.88 Qunyi Minying Area, North of Hengshan Road, Yushan Town,Kunshan City,Jiangsu Province,China 215300
Contact name:Sophia Chan
Kunshan Sochi Electronics Co.,Ltd |
|
|
Working Conditions:
| Power Supply: | 3PH-AC380V+PE,50/60HZ 15KVA |
| Temperature: | 22±2℃/45%-65% |
| Noise: | ≤75dBA |
| Air Pressure: | 6.5-7.5bar |
Product Datas:
| X,Y,Z-axis Stroke | 560mm*700mm*40mm |
| X,Y-axis Drive | Imported High-power servo motor(Guaranteed transmission speed) |
| Z-axis Drive | Imported servo motor |
| Feed Rate X,Y-axis | 60m/min |
| Feed Rate Z-axis | 30m/min |
| Max. Working Area | 560mm*700mm*40mm |
| Drilling Diameter | Φ0.2mm-Φ6.35mm |
| Drilling Accuracy | ±0.025mm |
| Positioning Accuracy | ±0.004mm |
| Replicate Positioning Accuracy | ±0.0025mm |
| Max. Drilling speed | 480-550hole/min |
| Spindle cooling method | Water cooling |
| Machine Dimension | 3300*2000*2000mm |
| Spindle Spacing | 560mm |
Notes:
The drilling speed depends on the thickness of the plate, the number of plates and the hole size. The drills on the 2*1.6mm PCB,for 0.3 holes the drilling speed is more than 460 holes/min； 0.5 holes,and the drilling speed is more than 510holes/min.
Our Service:
Customized & new generation PCB drilling machine
QIC System: Large and small pressure foot switching function to ensure small PCB board’s accuracy.
The CBDT electric contact automatic detection broken tool function is the timely response, and the hole can be used to monitor the edge collapse. It can be used as a fast drilling function.
Spindle configuration:
ABL/WESTWIND 160-180KTDM High-speed air-floating spindle for stable 100μm micro-hole machining, good macro hole and slot machining
Drive System:
Imported high-function, high-torque motor to ensure fast transmission speed
Transmission system:
Japan NSK high precision lead screw (fast, quiet)
German Rexroth P-precision Linear Guideway(High precision,long lasting)
Tool magazine selection
Upper-tool magazine:
Capacity 220 / pcs/ axis, can achieve full diameter tool without collar, short tool change time, easy to operate the upper and lower plates, don’t rotate the tool change.
Lower-tool magazine:
Large capacity of 300, easy to arrange the knife automatically, operate, replace the tool change, clean the tool, have little effect on the spindle
ontrol software:
Mature, stable advanced software control system, friendly interface and graphical simulation function, easy learning
Feedback system:
Imported as a closed grating ruler, dustproof and antifouling effect is very good
Tool Detection:
Imported Tool detection can realize tool length and tool diameter detection to ensure the accuracy of the drill
More pictures:
