|
[China]
Trade Verify
Address: Building H, GuoRui Pioneering Park, No. 1068 Jinyang East Road, Lujia Town, Kunshan, Suzhou,Jiangsu,China.
Contact name:Eva liu
YUSH Electronic Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
60L PCBA Offline Cleaning Machine For SMT Line For Rosin Flux, No-Clean Flux
SME-5600 PCBA Cleaning Machine Introduction
SME-5600 is an energy-saving, environmental protective, integrated, high-end cleaning machine. It can automatically complete cleaning, rinsing, drying process in one chamber by just push the start key.
SME-5600 main application: Car electronics PCBA, Military PCBA, Aerospace PCBA, Telecom PCBA, Medical device PCBA, Digital meters PCBA.
For Rosin flux, No-clean flux,Water-soluble flux , Solder paste ball and other organic and inorganic pollution materials on SMT and THT PCBA.
PCBA Offline Cleaning Machine SME-5600
1. SME-5600 Structure
3. 3 steps main process
Liquid Clean ---- DI water Rinse ---- Hot air Dry
Upper/middle/lower 3pcs, 360° rotation spray rods, 2 layers cleaning baskets
4.Flow chart
In general, the cleaning process parameters are: cleaning time (10-20) min, rinse time (1-2) min, rinse times (3-5) times, drying time (20-30) min, cleaning temperature (40 -60) ℃, rinse temperature (room temperature), drying temperature (70-95) ℃, so the general completion of a cleaning process time (40-60) min, under special circumstances according to the actual situation
5.Technical Spec
| S/N | ITEM | SME-5600 SPEC |
| 1 | retangle Cleaning basket | L610 x W560 x H100(mm)x2 layers |
| 2 | liquid tank capacity | 60L |
| 3 | concerntrate liquid tank capacity | 30L |
| 4 | temporary tank capacity | 18L |
| 5 | clean time | 10~20min(0~99min adjustable) |
| 6 | rinse time | 1~3min/times(0~10min adjustanble) |
| 7 | hot air dry time | 15~30min(0~60min adjustable) |
| 8 | rinse times | 3~5times(1~59 times adjustable) |
| 9 | cleaning liquid temp | room temp~75℃ |
| 10 | rinse DI water temp | room temp~75℃ |
| 11 | hot air dry temp | room temp~99℃ |
| 12 | liquid tank heater power | 9KW |
| S/N | ITEM | SME-5600 SPEC |
| 13 | temporary tank heater power | 6KW |
| 14 | Hot air heater power | 7.5KW |
| 15 | Resistivity range | 0~18MΩ |
| 16 | electric pump | 4.0KW |
| 17 | air pump | 1 Inch |
| 18 | liquid Spray pressure | 0~5kgf/cm2 |
| 19 | liquid filter | 0.2um |
| 20 | DI water filter | 0.2um |
| 21 | Air vent size | φ100XH30(mm) |
| 22 | Power/air supply | AC380V,50/60HZ,65A /0.5~0.7Mpa,200~400L/Min |
| 23 | Machine size | L1300xW1200xH1850(mm) |
| 24 | Machine weight | 600KG |
6-1. Features
1. the whole process visible : the cleaning process can be visible through the front window and LED light.
2. automatic cleaning mode: clean, rinse, dry process can complete in one compact machine.
3. the most scientific nozzle design: the use of left and right incremental arrangement --- to enhance cleaning efficiency,back and forth movement of basket - completely solve the cleaning blind area;
4. the nozzle pressure adjustable design: to solve the small and light PCBA in the high pressure spray under the conditions of the collision, splash problem;
5. the standard dilution tank heating system: greatly improve the cleaning efficiency. Shorten the cleaning time;
6. a comprehensive cleaning system: for SMT; THT PCBA after welding the surface of the residual rosin, water-soluble flux, no-clean flux / solder paste and other organic and inorganic pollutants for thorough and effective cleaning;
7. convenient cleaning dilution to add: can be manually added, but also by setting the ratio (5% to 25%) automatically with DI water and chemical liquid (option);
SMT Cleaning Machine
Pneumatic stencil cleaning machine SME-750 Electric stencil cleaning machine SME-800
Soldering wave oven pallet cleaning machine SME-5200 Mis-print PCB cleaning machine SME-210
Squeegee cleaning machine SME-220 Nozzle cleaning machine SME-24
PCBA in line cleaning machine SME-6200 DI water machine DI-1000
