YUSH Electronic Technology Co.,Ltd |
Verified Suppliers
|
|
Automatic PCB Depaneling Equipment Aluminum Based Board Cutting Machine
specifications
Max length 330mm(Can custom made)
Cutting thickness 0.3-3.5mm
Voltage and Power 110V/220V
Working air pressure 0.5-0.7Mpa
speed due to operator skilled level
size 620*230*400mm
weight 165kg
1. Easy maintenance and operation
2. Thin PCB even to 0.3mm can be sheared safely
3. Shearing process without vibrations due to pneumatic drive unit
features
1. Shearing PCBs with sensitive SMD, capacitors or thin board even
to 0.3mm can be sheared safely.
2. Shearing operation is that operator stamps the foot pedal to
shear PCB.
3. Highest components near the v groove of PCB can be up to 70mm.
4. The minimum distance is allowed to be 0.5mm between V
groove and the electronic components.
5. Gap for insertion of PCB can be easy to adjust by the adjusting
knob in front of the machine.
6. Pneumatically driven and electromagnetic valve control.
7. Shearing process without vibrations due to pneumatic drive unit
.
All-purpose
Straight Knife pcb depaneling machine -
Pneumatically driven and electric control
The machine is pneumatically driven and electric control. The
straight knife type separator machines were designed to separate
pre-scored panel boards carefully, without bending or tension
stress. Even
sensitive SMD-components like ceramic capacitors will not be
damaged by the separate process. Due to the special design of the
knives also boards with high components placed close to the
edges can be separated safely. Based on a proven method of
separating, wedge-shaped knives are used to cut the panels
within the groove. This enables boards of less than 1 mm
thickness to be separated safely and without creating stress.
Features
1, No vibration during the process to prevent damage to
precise PCB
2, Gap for insertion of the board can easily be adjusted by means
of the adjusting knob in the top side of the machine, low friction
design is applied.
3, ower knife height adjustable, the front and real portion can be
adjusted separately. No thin plates are required after
re-sharpening the knife.
4, Operation and maintenance can be done also by unskilled
personnel
Specification :
Maximum length of the board: | 300mm / 400mm |
Package Size: | 720mm(L)*300mm(W)*440(H) |
Thickness: | 0.50~3.5mm |
Power supply: | 220VAC / 110V |
Working air pressure: | 0.4——0.6Mpa |
Weight: | 189 kg |
Scope of application: | All V-CUT SMD PCB board |