110V / 220V PCB V Cut Machine Foot Swith Pressed Without Cutting Burring

110V / 220V PCB V Cut Machine Foot Swith Pressed Without Cutting Burring

Without Cutting Burring Phenomenon PCB Separator YES-1 important points:

1. The blade distance is entered on the operating panel and its adjustment is motor-powered.

2.  Up to nine programs can be stored.

3. The materials used for PCBs are FR4 and aluminum

4. The continuously adjustable separation length is set with limit switches.

5. The accumulated cutting performance is displayed for the purpose of scheduling preventive maintenance of the blade

6. The tailgate depth range: unlimited. The largest plate cutting width: unlimited,the maximum cutting length: 500mm, the plate thickness: 0.25-3.5mm. The thickness between V groove: 0.25-2.0mm.

7. The upper and lower knives is made of imported high-speed steel material,which are durable and can be regrinded.be adjusted precisely.

8. The machine can be in supporting use of a complete set of conveyor belt,which is convenient for the cut PCB to be send out automatically.

9. The platform is adjustable. It is good for the product quality when lifting the platform, because it will reduce stress and will not hurt the product.

10. The spacing device applies to products of different size, so as to improve the work efficiency.

China PCB Depaneling Tool MAESTRO 4M YES-1 Updating Version:

Safe operation equipped with Electric eye safe sensor to keep your workers safety

The PCB is placed with its pre-scored groove onto the linear blade,when the foot swith is pressed,the blade carrier with the circular blade moves across the PCB,separating it into individual units.

The clearance between the upper guide and the linear blade is adjustable to ensure that the PCB is only separated in the pre-scored groove.

Blad moving type pcb depaneling machine can greatly help you work.

Contact us to see the machine working video

 
V Cut PCB Depaneling machine Technical:
 

Salient Features include: Touch panel with five route adjustments for quick change of PCB size settings. Pre-setting of cutting start and end point to control the cutting length.Easily configurable cutting parameters such as cutting speed, adjustable upper blade distance etc.; Upper blade can be adjustable between 0 and 2mm for PCBs of different thickness; Long life steel alloy blade; High frequency lighting to protect eyes and better illumination; Safety devices such as emergency stop to prevent danger to operators