Active Member
|
[China]
Address: A1-405 (Exit A, Fuyong Metro Station), Fuhai Information Port, Bao'an District, Shenzhen. 10mins from Shenzhen Bao'an International Airport by subway
Contact name:Cyan Hong
Shenzhen Lefang Electronics Co., Ltd |
|
|
| Step 1 Please send us Gerber file with these format: .CAD / .Gerber / .PCB / .DXP / .P-CAD, etc | ||||||||||||||||||||
| Step 2 Also please provide us the below details for quick quotation: | ||||||||||||||||||||
Board material: Fr - 4 / CEM - 1 / CEM - 3 / 22F / Fr - 1 / others | ||||||||||||||||||||
| Material brand: SY / KB / Rogers (optional) | ||||||||||||||||||||
| Material Specification:High Tg / copper based / aluminum based or others (optional) | ||||||||||||||||||||
| Board thickness: 0.1 - 6.0 mm | ||||||||||||||||||||
| Copper thickness: 0.05 Oz - 8 Oz ( 17 um - 288 um ) | ||||||||||||||||||||
| Surface Treatment: OSP / ENIG / HASL / Lead Free HASL / Immersion Tin / Immersion Sin | ||||||||||||||||||||
| Color of solder mask and silk print: Green / red / blue / black / white / yellow ,etc | ||||||||||||||||||||
| Board size and quantity | ||||||||||||||||||||
If you don't have Gerber file, please provide us the imfomation as step 2 or post your PCB Board to us for clone.
| ||||||||||||||||||||
SAMPLE:
| ||||||||||||||||||||
| ||||||||||||||||||||
No.
| Item
| Data
|
| 1 | Layer count | 1-20 layers |
| 2 | Raw material type | Halogen free FR-4, high Tg FR-4, thick copper FR-4, CEM-3, copper
based, aluminum based |
| 3 | Raw material brand | Rogers,Isola,Arlon, ITEQ, Hitachi, SY, KB,etc |
| 4 | Board thickness | 0.1-6.0mm |
| 5 | Max board size | 600 mm * 700 mm |
| 6 | Solder mask | Green, red, blue, black, white, yellow |
| 7 | Surface treatment | HASL/HASL lead free , OSP, Immersion gold / silver / tin , gold plating
(hard gold and soft gold), silver plating, tin plating, platinum plating,
carbon ink, and ENEPIG(electroless nickel - electroless palladium -
immersion gold) |
| 8 | Copper thickness | 0.05 Oz - 8 Oz (17 um-288 um ) |
| 9 | Min Line width /space | 0.065 mm / 0.065 mm |
| 10 | Finished hole size | 0.10 - 5.95 mm |
| 11 | Blind/buried via | 0.10 mm |
| 12 | Aspect ratio | 10:1 |
| 13 | PTH tolerance | + / - 0.05 mm |
| 14 | Hole location tolerance | + / - 0.05 mm |
| 15 | Impedance control tolerance | + / - 8% mm |
| 16 | Outline tolerance | + / - 0.10 mm |
| Layer count | Sample lead time/workday | Batch lead time/workday |
| 1-2L | 2 | 6 |
| 4L | 5 | 8 |
| 6L | 5 | 9 |
| 8L | 6 | 10 |
| 10L | 8 | 10 |
| 12L | 8 | 12 |
| 14L | 10 | 15 |
| 16L | 10 | 18 |
| 18-40L (Up to difficulty) | at least 18 | at least 24 |
P.S. For HDI, Blind/Buried Hole PCB: Regular Lead Time + 3 workdays | ||
| Board Brand | ITEQ, SY, Isola. Rogers, Arlon, Nelco, Taconic, Hitachi, KB,etc |
| Potion | Rohm & Haas, Atotech, Umicore |
| Printing Ink | Taiyo, Rongda |
| Dry Film | Asahi, Dupont, Etertec |
Now send us your inquiry, and you will be replied within 8 hours!
Little knowledge - Medical Devices
Electronics contributes significantly to today's health-care industry like in diagnostic, monitoring and treatment devices. Because of the health implications associated with them, medical PCBs are held to higher standards than most other PCB types.
PCBs within the medical industry are highly specialized to satisfy the restriction of medical devices. In many medical applications, requirements like size and appearance are existed for an implant or emergency room monitor. For this reason, medical PCBs tend to be specialty high-density interconnect PCBs (HDI PCBs) or made with flexible base materials, allowing PCB to flex during use.
