Active Member
|
[China]
Address: Huishang Building, 19-128 Nathan Road, Yau Tsim Sha Tsui, Yau Tsim, Hong Kong
Contact name:Mank.Li
Shenzhen Chaosheng Electronic Technology Co.,Ltd |
|
|
Titan PCB Lead Time (Days) Titan PCBS Manufacturing Capabilities
pcb layout,humidity card SMT, DIP, TEST,Product Description 8Isola HDI High Frequency PCB Quick Turn Printed Circuit Boards
pcb product field:
Communication terminal, communication station, electronic
communication, computer, home appliance, electrical appliance, SD
card, SG card, mobile phone, computer, automobile, finance,
aerospace, aviation, medical, military, led, power control power
supply, industrial power supply, computer, office Equipment,
digital products, computers, LCD, etc .;
fpc product field:
CD-ROM, hard disk, printer, fax machine, scanner, sensor, mobile
phone, walkie-talkie antenna card, high-end camera, digital,
camera, laser head, CD-ROM, medical, instrumentation, drive,
automotive instrumentation, medical instrument, led light,
lighting, Copper-based electronics, aviation, aviation, national
defense and other high-tech products, more than 70% of the products
are exported to the Americas, Europe, Japan, Asia Pacific and other
countries and regions.
| Items | Manufacturing Capabilities | Remarks | |
|---|---|---|---|
| Number of Layers | – | 1-10 layers | For orders above 10 layers,please view the below “Standard PCB” or contact our sales rep. |
| Material | – | FR-4,Aluminum | For Flex, Rigid-flex, Metal-based (Aluminum etc.,), HDI, Halogen-free, High Tg, etc.,please view the below “Standard PCB” or contact sales rep. |
| Maximum PCB Size(Dimension) | – | 500*1100mm (min 5*6mm) | Any sizes beyond this dimension, please view the below “Standard PCB” or contact sales rep. |
| Board Size Tolerance(Outline) | – | ±0.2mm/±0.5mm | ±0.2mm for CNC routing, and ±0.5mm for V-scoring. |
| Board Thickness | 0.2-2.4mm | 0.2,0.4, 0.6, 0.8, 1.0, 1.2, 1.6, 2.0, 2.4mm. Please view the below “Standard PCB” or contact us if your board exceeds these. | |
| Board Thickness Tolerance(t≥1.0mm) | – | ±10% | Normally “+ Tolerance” will occur due to PCB processing steps such as electroless copper, solder mask and other types of finish on the surface. |
| Board Thickness Tolerance(t<1.0mm) | – | ±0.1mm | |
| Min Trace | 0.1mm/4mil | Min manufacturable trace is 4mil(0.1mm), strongly suggest to design trace above 6mil(0.15mm) to save cost. | |
| Min Spacing | Min manufacturable spacing is 4mil(0.1mm), strongly suggest to design spacing above 6mil(0.15mm) to save cost. | ||
| Outer Layer Copper Thickness | 1oz/2oz/3oz(35μm/70μm/105μm) | Also known as copper weight. 35μm=1oz, 70μm=2oz, 105μm=3oz. Please view the below “Standard PCB” or contact us if you need copper weight greater than 3oz. | |
| Inner Layer Copper Thickness | 1oz/1.5oz(35μm/50μm) | Inner copper weight as per customer’s request for 4 and 6 layers. Please contact us if you need copper weight greater than 1.5oz. | |
| Drill Sizes (CNC) | 0.2-6.3mm | Min drill size is 0.2mm, max drill is 6.3mm. Any holes greater than 6.3mm or smaller than 0.3mm will be subject to extra charges. | |
| Min Width of Annular Ring | 0.15mm(6mil) | For pads with vias in the middle, Min width for Annular Ring is 0.15mm(6mil). | |
| Finished Hole Diameter (CNC) | 0.2mm-6.2mm | The finished hole diameter will be smaller than size of drill bits because of copper plating in the hole barrels | |
| Finished Hole Size Tolerance(CNC) | – | ±0.08mm | For example, if the drill size is 0.6mm, the finished hole diameter ranges from 0.52mm to 0.68mm will be considered acceptable. |
| Solder Mask | LPI | Liquid Photo-Imageable is the mostly adopted. Thermosetting Ink is used in the inexpensive paper-based boards. | |
| Minimum Character Width(Legend) | 0.15mm | Characters of less than 0.15mm wide will be too narrow to be identifiable. | |
| Minimum Character Height (Legend) | – | 0.8mm | Characters of less than 0.8mm high will be too small to be recognizable. |
| Character Width to Height Ratio (Legend) | – | 1:5 | In PCB silkscreen legends processing, 1:5 is the most suitable ratio |
| Minimum Diameter of Plated Half Holes | – | 0.6mm | Design Half-Holes greater than 0.6mm to ensure better connection between boards. |
| Surface Finishing | HASL with lead HASL lead free Immersion gold,OSP | The most popular three types of PCB surface finish. Please view the below “Standard PCB” or contact us for other finishes. | |
| Solder Mask | Green ,Red, Yellow, Blue, White ,Black | No extra charge (Green, Red, Yellow, Blue) | |
| Silkscreen | White, Black, None | No extra charge. | |
| Panelization | V-scoring, Tab-routing, Tab-routing with Perforation (Stamp Holes) | Leave min clearance of 1.6mm between boards for break-routing. For V-score panelization, set the space between boards to be zero. | |
| Others | – | Fly Probe Testing (Free) and A.O.I. testing(free), ISO 9001:2008 ,UL Certificate | No extra charge. |
| Items | Sample | High Volume |
| Single Sided PCB | 1-3 | 4-7 |
| Double Sided PCB | 2-5 | 7-10 |
| Multi-layer PCB | 7-8 | 10-15 |
| PCB Making & Assembly | 8-15 | 15-20 |
