GE Dash3000 Dash4000 Dash5000 Patient Monitor Parts Display Assembly Part NO. 004-0004-004 REF 2016792-002 REV A

GE Dash Series Patient Monitor Battery Door

GE Dash3000 Dash4000 Dash5000 Patient Monitor Battery Cover Door 2026653-019

► Brief Description

GE Dash3000 Dash4000 Dash5000 Patient Monitor Display Assembly 004-0004-004 2016792-002 REV As is the display assembly of GE Dash3000 Dash4000 Dash5000 patient monitor, with internal circuit board and external frame and display. There are also button components and knobs on the frame, which are the standard equipment that a standard GE Dash3000 Dash4000 Dash5000 patient monitor should have.

► Specifications

► Feature

In this GE Dash3000 Dash4000 Dash5000 Patient Monitor Display Assembly 004-0004-004 2016792-002 REV A Active Matrix Color Liquid Crystal Display (LCD) is assembled into a shock absorbing isolator that mounts to the front bezel of the patient monitor inside to protect the display from mechanical shock during use. And the acrylic filter protects the display panel from impact and improves visibility with an anti-glare surface coating on the viewing side of the filter. It also has a scratch-resistant surface coating.

► Remove or Replace

1. Remove the handle assembly from the patient monitor.(Dash 5000 patient monitor does not require this step)

2. Place the patient monitor face down on a non-abrasive, static-free surface. Make sure the Trim Knob control hangs off the edge of the surface to avoid damage.

3. Use a Phillips head screwdriver to remove the four screws (six screws for Dash 5000 patient monitors) securing the display assembly to the main unit.

4. Partially separate the display assembly from the main unit and look inside the unit to determine how the display flex cable is folded. Depending on the model, the Dash patient monitor may have a display flex cable that folds up from the bottom or right side of the display.
The location of the fold determines how to position the display assembly for removal from the main unit.

5. Remove the two screws that connect the flexible circuit to the CPU/ battery housing assembly of the main unit. Pull the flexible connector stress relief device and remove the flexible connector.

6. Lift the buckle and tongue and remove the DAS connector. Place the display component face down on a non-electrostatic, non-abrasive surface.

7. Replace faulty display components.

Replace the Display Flex component.

CAUTION: CABLE DAMAGE - Do not kink, pinch, stretch, twist or tightly fold the display flex cable. If the flex cable is not handled with care, it can damage the cable to the point of affecting the display integration and even the use of the entire device.

► Detailed photos

Thank you for your time. If you are interested in our company or our GE Dash3000 Dash4000 Dash5000 Patient Monitor Display Assembly 004-0004-004 2016792-002 REV A, or have any suggestions for us, please feel free to contact us. We will reply you within 12 hours. Wish you a happy life.