IMEC10 Patient Monitor Parts Speaker HOPSUN 4Ω 2W Refurbished

Mindray IMEC10 Patient Monitor Speaker HOPSUN 4Ω 2W

About Speaker

Speaker is that it gives alarm tones (45 to 85 dB), key tones, QRS tones; support PITCH TONE and multi-level tone modulation; alarm tones comply with IEC60601-1-8

Patient monitor Maintenance and Cleaning

Please keep your device and its accessories free of dust. To prevent damage to the equipment, be sure to observe the following:

﹒ Dilute cleaners and disinfectants according to the manufacturer's directions, or use the lowest concentrations possible.

﹒ Do not immerse the device in liquid.

﹒ Do not pour liquids on the device or accessories.

﹒ Do not allow liquids to enter the cabinet.

﹒ Do not use abrasive materials such as steel wool or silver polish, nor any strong solvents such as acetone or

cleaning agent).

warn

Before cleaning the appliance, the power must be turned off and the power cord disconnected from the outlet.

Care

If you accidentally pour liquid on the device or accessories, please contact the maintenance personnel or our company immediately.

Notice

To clean or sanitize a reusable accessory, see the instructions provided with the accessory.

clean

The equipment should be cleaned regularly, and the frequency of cleaning should be increased in areas with severe environmental pollution or heavy sandstorms. Before cleaning, please consult or learn about the hospital's regulations on equipment cleaning.

The following cleaners are available:

﹒ Sodium hypochlorite (bleach powder for washing)

﹒ Hydrogen peroxide (3%)

﹒ Ethanol (70%)

﹒ Isopropyl Alcohol (70%)

When cleaning the device:

1. Turn off the power and disconnect the power cord.

2. Use a soft cotton ball to absorb an appropriate amount of detergent and wipe the display screen.

3. Use a soft cloth to absorb an appropriate amount of detergent and wipe the surface of the device.

4. If necessary, wipe off excess detergent with a dry cloth

5. Place the device in a ventilated and cool environment to air dry. If you need to clean the touch screen during monitoring, please lock the touch screen first.

disinfect

Disinfection operations may cause some degree of damage to the monitor. Disinfection is recommended only when deemed necessary in your hospital maintenance program. Equipment should be cleaned prior to disinfection.

Recommended disinfectants are: 70% ethanol, 70% isopropanol.

maintain.

Before using the physiological monitor, after continuous use for 6 to 12 months, after maintenance or upgrade, a comprehensive inspection should be carried out by qualified maintenance personnel to ensure the normal operation and work of the physiological monitor.

Check items should include:

﹒ The environment and power supply meet the requirements.

﹒ The device and accessories are free from mechanical damage.

﹒ The power cord is free from fraying and has good insulation performance.

﹒ Use specified accessories.

﹒ The alarm system is functioning normally.

﹒ The recorder works normally and the recording paper meets the specified requirements.

﹒ battery performance.

﹒ Various monitoring functions are in good working condition.

If you're interested in Mindray IMEC10 Patient Monitor Speaker HOPSUN 4Ω 2W,feel free to contact us .Thank you .