Active Member
|
[China]
Address: Rm317,Bld 2, Huahan Indus Zone, Pingshan,Shenzhen,Guangdong
Contact name:Arthur
XINMEI MEDITECH （HUIZHOU) CO LTD |
|
|
High-frequency Carbon & Sulfur Determinator
Our Carbon & Sulfur Determinator has following special features:
Work individually even when the PC doesnot work
Support analyzing 1 0 0 0 samples without cleaning the burning tube
Setup with 4 independent detecting systems to support wide-range CO₂ and SO₂ samples
HARDWARE FEATURES:
1. Integrated infrastructure including high frequency combustion device and infrared detecting systems
2. Hewlett-Packard desktop computer, liquid crystal display and laser printer
3. With carbon monoxide compensation, the analytical results are more accurate
4. Standard metal connectors ensure the tightness of gas system. Japan SMC valves support continuous analysis of more than 100000 samples.
5. Unique gas route reverse-purge design enables continuous analysis of more than 1000 samples without cleaning furnace part.
6. Two sets of carbon detecting systems provide wide analytical range of carbon.
7. High precision Digital Mass Flow Controller can eliminate the influence of outside factors such as temperature, pressure and so on. Moreover its accuracy and stability are better than the Variable Flow Meter.
8. Infrared detection device is characterized by the integrated design of optoelectronic, exquisite and durable structure with its reliability and stability reaching to level J standard.
9. Swiss modulating motor can keep continually working 30,000 hours without any mistake.
10. Ultra-micropore stainless steel metal dust filter which can be used for a long time with its excellent characteristics including anti-corrosion and no need to clean
When the sample burns in the high-frequency induction furnace, the carbon and sulfur included in the sample will be oxidized to CO2 and SO2, which will be sent to infrared detector with O2 as the carrier.The electronic signal produced by the infrared detector will be delivered to monitor for data processing after amplification. The analytical results will be displayed then and the percentage of carbon and sulfur contents will be printed out through printer.
DESCRIPTION:
CS-902S high-frequency infrared carbon/sulfur determiantor adopts an integration infrastructure of high frequency combustion part and infrared analysis part, with four sets of detecting systems high carbon, low carbon, sulfur, carbon monoxide equipped.
P/N:
RSD CS-902S
NEW CERAMICS LIGHT SOURCES:
High efficiency, low temperature, long lifetime;
Good spectral characteristics and no attenuate for long wave.
INFRARED MODULATING MOTOR:
1. Swiss modulating motor can keep continually working 30,000 hours without any mistake.
2. Precision frequency dividers and drivers with high-power MOSFET provide stable and reliable work.
SPECIFICATIONS:
Carbon:
1. C1: 0.001 - 50%(Can be extended to 100%)
2. C2: 0.00001% - 0.5%
3. RSD £ 0.4%
4. Sensitivity:0.1ppm
5. Meet ISO9556 requirement
Sulfur:
1. S1: 0.1% - 60%(Can be expanded to 100%)
2. S2: 0.00001% - 5%
3. RSD £ 1.0%
4. Sensitivity:0.1ppm
5. Meet ISO4935 requirement
Analysis samples:
Steel,Ferroalloy,Nonferrous Metal,Ore,Coke,Raw Material and Slag,Rare Earth etc.
INFRARED CARBON/SULFUR ABSORPTION DEVICES
Integrated design of optoelectronic, exquisite and durable structure;
Laser welds components, which ensure the tightness of gas system;
Preamp adopts special integrated circuit, enabling reliability and stability reaching to level J standard.
WARRANTY:
1 Years after receiving the goods
PICTURES:
