|
[China]
Trade Verify
Address: 14F, Duocai B Bd, Guanlan Hi-Tech Park, Guanhu, Longhua, Shenzhen, Guangdong, China. P/c : 518110
Contact name:David He
KOCENT OPTEC LIMITED |
|
Verified Suppliers
|
|
|
FTTH 4port Vertical Mini Size Fibra Optica Splice Enclosure Box / 12fo 24fo 48fo FOSC Box
Introduction
- Optical cable junction box, also known as optical cable junction box and gun barrel, is the place where the end of optical cable is connected. Then it is connected to optical switch through optical fiber jumper to prevent material aging caused by heat, cold, light, oxygen and microorganisms in nature. It also has excellent mechanical strength.
- The solid shell and main structure of optical cable junction box can endure the worst environmental changes, and play a flame retardant role at the same time. Waterproof effect, so that vibration, impact, cable tension, twist and so on are protected.
- KCO-DM22-48LX splice closure make by high quality plastic, the strong housing provide fire resistant, anti-aging, waterproof, anti-UV and quakeproof while protecting splices during pulling, torsining and impacting.
- KCO-DM22-48LX is mini size of dome type splice closure. It come with 4 cable port, 2 ports for input cable and 2 ports for output cable. Its maximum capacity is 48 cores.
- The box can install 4 trays, each tray capacity is 12 cores.
- It is suitable for outdoor application. Can be mounted on a pole, wall or a strand.
- It ensures long term reliability and usage under ambient
temperature from -40℃ to +65℃.
- Used to directly connect or splice optic cable fibers, in aerial, underground, direct buried, wall-mounting, hand
hole and duct mounting application.
Quick detail:
| Name: | Mini Size Fiber Optic Splice Closure |
| Type: | Dome type, or vertical type |
| Part number: | KCO-DM22-48LX |
| Max capacity: | 48fibres |
| Splice tray number: | max. 4 trays |
| Tray capacity of fibers: | 12 cores |
| Cable entry port: | 2 ports |
| Cable out port: | 2 ports |
| Cable Diameter: | 2.0-18.0mm |
| Size: | 320*160mm |
| Weight: | 1.80kg |
| Material: | PC/ ABS / PP Plastic |
| Water-proof grade: | IP65 |
| Application: | Outdoor |
| Working temperature: | -30℃ to 60℃ |
| Install way: | pole mount, aerial, underground, pipe line, ... |
| Life time: | >25 years |
Application:
- Fiber optic project.
- FTTX
- Local Area Networks (LAN)
- CATV
- Analog/Digital Passive Optical Networks (PON)
Features:
- Waterproof class: IP67
- Great mechnical performance
- Great resisting aging performance
- High airproof,dampproof and resisting, lightning strike
performance
- Can be place with the aerial cabal or buried in carth put in the
pipeline
Main performance
- Stretch: the box body inflated after sealing 60KPa ± 5Kpa, can
withstand 1000N axial tension, to maintain 1 min, no change in air
pressure;
- Flattening: The box body is sealed and inflated at 60KPa ± 5Kpa,
and it can bear the horizontal uniform pressure of 2000N / 10cm.
The pipe can withstand 600N / 10cm without change of air pressure.
- Hit: the box after sealing inflatable 60KPa ± 5Kpa, in the box
above the 1.6 drop 1 kg steel ball, the impact of three times, the
box does not crack, pressure no change;
- Resistance to voltage intensity: water depth 1.5m, soak 24hr,
15KV DC 1min without breakdown, no arcing phenomenon;
- High temperature test: the box after sealing inflated 60kPa ±
5kPa, at + 60 ℃ for 2hr, the box without deformation, no leakage;
- Low-temperature test: box sealed inflatable 60kPa ± 5kPa. The
temperature at -40 ℃ for 2hr, the box without deformation, no
leakage;
- Temperature cycle test: the box after sealing inflatable 60kPa ±
5kPa. -40 ℃ each point constant temperature 2hr, three cycles, the
pressure drop amplitude ≤ 5kPa.
- Bending: the box after sealing inflatable 60KPa ± 5Kpa, tension
load 150N, bending angle ± 45°, 10 cycles, no change in air
pressure;
- Reverse: the box after sealing inflatable 60KPa ± 5KPa, torque
50N.m, torsion angle +90°, 10 cycles, no change in air pressure;
- Sealing performance: gas pressure 100kPa ± 5kPa, water bath soak
1 5min, no bubbles to escape, no change after 24hr pressure;
- Insulation resistance: water depth 1.5m, soak 24hr, the
insulation resistance ≥ 2 × 104MΩ;
Product pictures:
Related products:
OEM/ODM Service:
- If you want to show your own brand LOGO on the goods such as
cable, package bag, label or any where. Our OEM and ODM service is
always ready to do it. Please contact with our sales team to get
best support.
Packing:
- According to Stardard Export Packing.
- Carton box, wooden box, wooden pallet.
Shipping:
- International express such as UPS, TNT, DHL, etc
- Internatioal air: CA, AA, EA, etc
- By sea
- Standard export sea port: Shenzhen, Hongkong, Ningbo
- Standard export airport: Shenzhen, Hongkong, Hangzhou, Shanghai
