Active Member
|
[China]
Address: ROOM 2204, NO.98， TIANGAO ALLEY, SOUTH BUSINESS DISTRICT, YINZHOU, 315194, NINGBO, CHINA
Contact name:Roy Zhang
Ningbo Anyo Import & Export Co., Ltd. |
|
|
General purpose relay 14F3 ( OMRON G2R-2) 8pin 5A DPDT, 29*12.6*20.6cm
Description:
A relay is an electrically operated switch. Current flowing through the coil of the relay creates a magnetic field which attracts a lever and changes the switch contacts. The coil current can be on or off so relays have two switch positions and most have double throw (changeover) switch contacts.
Relays allow one circuit to switch a second circuit which can be completely separate from the first. For example a low voltage battery circuit can use a relay to switch a 230V AC mains circuit. There is no electrical connection inside the relay between the two circuits, the link is magnetic and mechanical.
Applications:
Relays are used wherever it is necessary to control a high power or high voltage circuit with a low power circuit, especially when galvanic isolation is desirable. The first application of relays was in long telegraph lines, where the weak signal received at an intermediate station could control a contact, regenerating the signal for further transmission. High-voltage or high-current devices can be controlled with small, low voltage wiring and pilots switches. Operators can be isolated from the high voltage circuit. Low power devices such as microprocessors can drive relays to control electrical loads beyond their direct drive capability. In an automobile, a starter relay allows the high current of the cranking motor to be controlled with small wiring and contacts in the ignition key.
General data:
| Contact form | 2A/2C |
| Insulation resistance | 100MΩMin at500VDC |
| Dielectric strength between open contacts | 1000VAC 50-60HZ(1 minute) |
| Dielectric strength between contacts and coil | 5000VAC 50-60HZ(1 minute) |
| Operate time | 15ms max. |
| Release time | 8ms max. |
| Ambient temperature | -30°C ~ +70°C |
| Shock resistance-Malfuction | 10G |
| Shock resistance-Destruction | 100G |
| Vibration resistance | 10-55Hz,1.5mm double amplitude |
| Ambient humidity | 20-85% RH |
| Weight | Approx 13g |
| Safety standard | TUV,CE |
Coil data (@20°C)
Rated voltage (VDC) | Coil Resistance Ω(±10%) | Max Operate Voltage (VDC) | Min Release Voltage (VDC) | Max Applied Voltage (VDC) | |
| 0.53W | 0.72W | ||||
| 3 | 17 | 12.5 | 2.4 | 0.15 | 3.9 |
| 5 | 50 | 36 | 4 | 0.25 | 6.5 |
| 6 | 68 | 50 | 4.8 | 0.3 | 7.8 |
| 9 | 155 | 115 | 7.2 | 0.45 | 11.7 |
| 12 | 270 | 200 | 9.6 | 0.6 | 15.6 |
| 24 | 1100 | 820 | 19.2 | 1.2 | 31.2 |
| 48 | 4400 | 3300 | 38.4 | 2.4 | 62.4 |
CAUTION:
1.The use of any coil voltage less than the rated coil voltage will
compromise the operation of the relay.
2.Pickup and release voltage are for test purposes only and are not
to be used as design criteria.
3.Unless otherwise stated, the rated coil voltage specified in coil
parameter tableshall be used for all tests and its application to
the relay.
Outline dimension(mm):
PCB board layout and Wiring diagram:
