|
[China]
Trade Verify
Address: 5-407 Xinyuanxin Business Center, Huaxin Road, Licheng District, Jinan City, Shandong Province, China
Contact name:Cindy
Jinan Wanyou Packing Machinery Factory |
|
Verified Suppliers
|
|
|
| 1, | Egg tray mould quantity | 1pcs | 2pcs | 3pcs | 4pcs |
| 2, | Raw material | Waste paper | Waste paper | Waste paper | Waste paper |
| 3, | Output for egg tray | 350pcs/hour | 700pcs/hour | 1000pcs/hour | 1300pcs/hour |
| 4, | Net weight per piece (gram) | 70g-75g | 70g-75g | 70g-75g | 70g-75g |
| 5, | The volume of waste paper consumed | 0.025ton / hour | 0.06ton / hour | 0.1ton / hour | 0.13ton / hour |
| 6, | The volume of water consumed | 0.05ton / hour | 0.15ton / hour | 0.2ton / hour | |
| 7, | Operators number | 2-3workers | 3-4workers | 4-6workers | 4-6workers |
| 8, | Area of workshop | More than 200M² | More than 240M² | More than 240M² | More than 240M² |
| 9, | Capacity of power | 25KW | 40KW | 50KW | 60KW |
Production Line Introduction
Pulping System
1. Put the raw material and water into the hydraulic pulper. you
will get the paper pulp after mixed 10-20 minutes.
2. Pulp pump will transfer the finished paper pulp into the slurry
pool.
3. The pulp pond beater will mix the pulp concentration.
4. The pulp pump will transfer the pulp into forming machine.
Molding System
1. The molding machine is to adsorb the pulp to the molding mold,
adsorb the pulp to the molding mold through the suction of the
vacuum system to absorb the excess water into the gas-water
separation tank, and then pump the water to the tank for storage.
2. The molding mold adsorbs the pulp and then forms it. and then
the transfer mold takes out the finished product and sends it to
the they drying tray.
Drying System
1.Heat source: natural gas, diesel, liquefied petroleum gas and
other combustion liquids and gases.The transmission mode adopts industrial transmission chain to drive
the net plate transmission, which runs in the drying line.
