|
[China]
Trade Verify
Address: Li Village, Wangqu Industry Zone, Qinyang Henan, China
Contact name:Marjorie
Qinyang PingAn Light Industry Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
Pingan made tissue paper machine
Description
Headbox is one of the most import parts in paper making machine. Performance of headbox desides paper uniform and quailty! This Pingan made tissue paper machine, we adopt hydraulic headbox.
Headbox is to evenly distribute the pulp in the transverse direction of the whole paper machine, and reduce the fiber flocculation as far as possible, so as to produce uniform and quantitative paper.
The main inlet pipe of the hydraulic headbox is designed according to the theory of square cone transverse isobaric to ensure the initial transverse distribution of the pulp evenly. Then the pulp flow generates appropriate high-strength micro turbulence through the bundle tube distribution, homogenization chamber and turbulence generator, so that the fibers are fully dispersed, and the paper gets better uniformity and uniform quantitative distribution. The special labial slat has good adjustability. The dilution water banner control device can work automatically under the control of the QCS system of the paper machine, which makes the transverse basic weight adjustment of the paper sheet accurate and convenient.
Main structure of headbox:
Surface processing quality of the headbox
Name | Ra(μm) Roughness | Treatment |
Pulp feeding and water feeding main pipe inner surface dilution water device Multipole bundle Balance room | 0.4 0.4 0.3 0.3 |
polish polish polish polish |
Turbulence generator and lip area inner surface Turbulence generator
Bottom lip Upper lip Small lip |
0.4 0.4
0.4 0.3 0.2 |
polish Electrochemical polish
polish polish Special polish |
Dilution water banner control Inner surface Dilution water valve |
0.4 0.2 |
polish Special polish |
Company information
Qinyang Pingan Light Industry Machinery Co., Ltd is a large scale enterprise. Specialized in paper making machinery, covering the sentific research, design, manufacturing and installation.
Since the reform and opening up policy of our state, we have exported our machines and equipment to many countries like Indonesia, UZ,Russia, Kirgizstan, KZ, Turkmenisan, Suriname , Syria, Magolia, Mali, Uganda, Mexico and Nigeria etc.
Installation and commissioning
| 1. | The supplier is responsible for guiding the installation (the buyer is responsible for the expenses of the supplier's installation and commissioning personnel) |
| 2. | The supplier shall send one engineer to guide the installation and comissioning on site. |
| 3. | The buyer shall be responsible for the hoisting of the equipment required in the installation process. |
| 4. | The buyer shall be responsible for the tools (except special tools) required in the installation process. |
| 5. | The consumables (such as electric and gas welding apparatus, welding rod, welding wire, raw tape, etc.) required in the installation process shall be provided by the buyer. |
| 6. | During commissioning, the buyer shall send personnel to actively assist the supplier. |
