Active Member
|
[China]
Address: No.18 Chunjian Industry Park, Fuyang City, Hangzhou 311403 China
Contact name:Sunny
Hangzhou Chenrui Air Separator Installation Manufacture Co. Ltd |
|
|
Industrial Medical Oxygen Generator / Medical Oxygen Equipment 400Nm3/H
1. Equipment Installation Condition
| oxygen capacity | 3-400Nm3/h |
| oxygen purity | 93%+-3% |
| output pressure | 0.1-0.4MPa(1-4Bar) adjustable / 15MPa filling pressure offered |
The process of oxygen generation plant
Oxygen Generator consist of two columns filled with molecular
sieve(CarboTech AC Gmbh). Pre-treated compressed air enters the
active column and follows up through the CarboTech. Nitrogen and
the other gases are being adsorbed while the oxygen passes through.
The active column is pressurized. When pressure is released, column
becomes inactive and completely regenerate. In order to secure
steady flow two columns are used, one is active while the other is
inactive. At the end of cycle they switch roles.
Oxygen from oxygen generator enters oxygen buffer. From there regulated oxygen is fed into the high pressure oxygen compressor where the oxygen is boosted and fed the filling ramp where oxygen cylinders are filled.
Our comapct plant is built on the skid or frame with one central electric socket enabling quick start up. All components are already connected in the factory, so no extensive installation is required.
2. Oxygen Generator Specification
| Specification | output (Nm³/h) | Effective gas consumption (Nm³/h) | air cleaning system |
| CBO-5 | 5 | 0.95 | KJ-1 |
| CBO-10 | 10 | 2.1 | KJ-2 |
| CBO-20 | 20 | 4.0 | KJ-6 |
| CBO-40 | 40 | 8.2 | KJ-10 |
| CBO-60 | 60 | 12.3 | KJ-12 |
| CBO-80 | 80 | 16.3 | KJ-20 |
| CBO-100 | 100 | 20.8 | KJ-20 |
| CBO-150 | 150 | 30.7 | KJ-30 |
| CBO-200 | 200 | 41 | KJ-40 |
3. Process Flow Brief Description
4. Technical Features
1). Full Automation
All systems are designed for un-attended operation and automatic Nitrogen demand adjustment.
2). Lower Space Requirement
The design and Instrument makes the plant size very compact,assembly on skids,prefabricated from factory.
3). Fast Start-up
Start-up time is only 5 minutes to get desired Nitrogen purity.So these units can be switched ON&OFF as per Nitrogen demand changes.
4). High Reliabiity
Very reliable for continuous and steady operation with constant Nitrogen purity.Plant availability time is better than 99% always.
5). Molecular Sieves life
Expected Molecular sieves life is around 15-years i.e. whole life time of nitrogen plant.So no replacement costs.
6). Adjustable
By altering flow,you can deliver nitrogen with precisely the right purity.
5. Application scope
1). Medical.The generator can be set up to fill the hospital
pipeline directly and use the filling ramp as a backup system.
Oxygen cylinders can be filled simultaneously or during hours with
low consumption.
2). Metallurgy: For anneal protection, agglomeration protection,
nitrogenizing, furnace washing and blowing, etc. Used in fields
such as metal heating treatment, powder metallurgy, magnetic
material, copper process, metallic mesh, galvanized wire,
semiconductor, etc.
3). Chemical and new material industries: For chemical material
gas, pipeline blowing, gas replacement, gas protection, product
transport, etc. Used in fields such as chemical, urethane elastic
fiber, rubber, plastic, tyre, polyurethane, biological technology,
intermediate, etc.
4). Electronic industry: For encapsulation, agglomeration, anneal,
deoxidization, storage of electronic products. Used in fields such
as peak welding, circumfluence welding, crystal, piezoelectricity,
electronic porcelain, electronic copper tape, battery, electronic
alloy material, etc.
