Home Companies ShenzhenYijiajie Electronic Co., Ltd.

SL353LT Omnipolar Hall Sensor Digital , Micropower Hall Magnetic Sensor Small And Versatile

ShenzhenYijiajie Electronic Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Room 1018, Floor 10, Building A, Xinghe Century Building, Caitian South Road, Futian District, Shenzhen

Contact name:Xu

Inquir Now

ShenzhenYijiajie Electronic Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

SL353LT Omnipolar Hall Sensor Digital , Micropower Hall Magnetic Sensor Small And Versatile

Country/Region china
City & Province shenzhen
Categories Solar Chargers
InquireNow

Product Details

SL353LT Hall Sensors Micropower Omnipolar Digital Small And Versatile

 

Micropower Omnipolar Digital Hall-effect Sensor ICs, SL353 Series, are small, and versatile, digital Hall-effect devices
operated by the magnetic field from a permanent magnet or an electromagnet. These sensitive devices are designed
to meet a wide range of potential applications with low power requirements including battery-operated equipment.

 

The SL353 Series devices respond to either a North or South Pole, meaning that they do not require the magnet
polarity to be identified, providing an easier installation and potentially reducing system cost.

 

Specifications Sheet:

TypeOmnipolar
Operating supply current9 mA
Maximum output current5 mA
Operating Point Min/Max20 G to 110 G
Min/Max Release Point (Brp)5 G to 95 G
Minimum operating temperature- 40 C
Maximum operating temperature+ 85 C
Operating supply voltage5 V
Installation styleSMD/SMT

 

Energy efficient
Supply voltage as low as 2.2 Vdc, combined with very low average
current (1.8 μA typ. for SL353LT the lowest in its class), reduces
power consumption, provides extended battery life, and promotes
energy efficiency.
Push-pull output does not require external pull-up resistor
Simplifies interface with common electrical circuits and likely reducing
PCB (Printed Circuit Board) space and costs to the customer.
Non-chopper stabilized design
Does not utilize chopper stabilization, eliminating the noise generated
by products using this technique. Customers do not need filters to
eliminate the chopper noise, helping to reduce PCB (Printed Circuit Board
space, part counts, and costs for the application.

Hot Products

HCN C 100 Electrochemical Gas Sensor Safety And Environmental Control HCN/C-100 Hydrogen Cyanide Gas ...
AWM5102VN Flow Sensor Mass Air 0 SLPM to 10 SLPM Silicon Materials FEATURES 1 Linear voltage output ...
Product Description: FS4008-50-O8-CV-A particle counter and gas flow sensor for various analyzers ...
FS4003-5-O6-CV-R Air Sampling Machine Gas Analyzer And Other Fields For Gas Flow sensor Product ...
Product Description: FS4003-5-O8-CV-A FS400 Series Gas Flow Sensors Are Suitable For clean Gas ...
Product Description: FS4008-30-O8-CV-A 50SLPM Gas Flow Sensor Is Suitable For Particle counters And ...