|
[China]
Trade Verify
Address: Room 1018, Floor 10, Building A, Xinghe Century Building, Caitian South Road, Futian District, Shenzhen
Contact name:Xu
ShenzhenYijiajie Electronic Co., Ltd. |
|
Verified Suppliers
|
|
|
Alc/C-100 Alcohols Gas Sensor Continuous Air Quality Monitoring
Performance data recorded at 20 – 25 °C, 30 - 50% RH, 900 - 1100
mbar
For further information about usage of Membrapor sensors, see
application note MEM1. The data
contained in this document is for guidance only. Membrapor AG
accepts no liability for any
consequential losses, injury or damage resulting from the use of
this document or from any
omissions or errors herein. Customers should test under their own
conditions to ensure that the
sensors are suitable for their own requirements.
| Rec. Load Resistor | 10 - 33 Ω |
| Bias (V_Sens-V_Ref) | +300 mV |
| Relative Humidity Range | 15 % to 90 % RH non-condensing |
| Temperature Range | -40 °C to 50 °C |
| Pressure Range | Atmospheric ± 10% |
| Pressure Coefficient | N.D. |
| Humidity Effect | None |
| Expected Operation Life | 2 years in air |
| Expected Long Term Output Drift in air | < 2 % signal loss per month |
| Storage Life | 6 months in container |
| Rec. Storage Temperature | 5°C - 20°C |
| Warranty Period | 12 months from date of dispatch |
Temperature dependence
The output of an electrochemical sensor varies with temperature.
The graphs below show the temperature-dependent variation of
baseline and sensitivity, respectively. The results shown here
are raw data (batch average) without any post-processing
steps.
The sensitivity
and baseline are referenced to the signal at 20°C (reference
point).
Please note: It is highly recommended to acquire the temperature
dependence curves with
the whole instrument. The sampling system, the humidity, the
electronics and the interaction
between the electronics and the sensor have a significant impact on
the temperature
dependence of the final measurement reading.
