Home Companies ShenzhenYijiajie Electronic Co., Ltd.

CR-50 Ammonia Detection Sensor RoHS , Highly Sensitive NH3 Ammonia Sensor

ShenzhenYijiajie Electronic Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Room 1018, Floor 10, Building A, Xinghe Century Building, Caitian South Road, Futian District, Shenzhen

Contact name:Xu

Inquir Now

ShenzhenYijiajie Electronic Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

CR-50 Ammonia Detection Sensor RoHS , Highly Sensitive NH3 Ammonia Sensor

Country/Region china
City & Province shenzhen
Categories Advertising Screens
InquireNow

Product Details

NH3/CR-50 Ammonia Gas Sensor Highly Sensitive NH3 Measurement

 

Applications

•Leak Detection

• Discontinuous Measurement

• Safety and Environmental Control

 

Specification

Rec. Load Resistor10 - 33 Ω
Bias (V_Sens-V_Ref)not allowed
Conformity to RoHS directiveRoHS Compliance
Relative Humidity Range15 % to 90 % RH non-condensing
Temperature Range-10 °C to 50 °C
Pressure RangeAtmospheric ± 10%
Pressure CoefficientN.D.
Expected Operation Life2 years in air
Storage Life3 months in container
Rec. Storage Temperature5°C - 20°C
Warranty Period12 months from date of dispatch

 

Temperature dependence

The output of an electrochemical sensor varies with temperature. The graphs below show the temperature-dependent variation of baseline and sensitivity, respectively. The results shown here are raw data (batch average) without any post-processing steps. The sensitivity and baseline are referenced to the signal at 20°C (reference point). Please note: It is highly recommended to acquire the temperature dependence curves with the whole instrument. The sampling system, the humidity, the electronics and the interaction between the electronics and the sensor have a significant impact on the temperature dependence of the final measurement reading.

Cross Sensitivity Data

The table below does not claim to be complete. Interfering gases should not be used for calibration. Please contact Membrapor AG for further support regarding cross sensitivities.

 

Hot Products

HCN C 100 Electrochemical Gas Sensor Safety And Environmental Control HCN/C-100 Hydrogen Cyanide Gas ...
AWM5102VN Flow Sensor Mass Air 0 SLPM to 10 SLPM Silicon Materials FEATURES 1 Linear voltage output ...
Product Description: FS4008-50-O8-CV-A particle counter and gas flow sensor for various analyzers ...
FS4003-5-O6-CV-R Air Sampling Machine Gas Analyzer And Other Fields For Gas Flow sensor Product ...
Product Description: FS4003-5-O8-CV-A FS400 Series Gas Flow Sensors Are Suitable For clean Gas ...
Product Description: FS4008-30-O8-CV-A 50SLPM Gas Flow Sensor Is Suitable For Particle counters And ...