Box Type 10 Tonne Single Girder Gantry Crane with P30 P38 Track

Box Type 10 Tonne Single Girder Gantry Crane With P30 P38 Track
 
Single Girder Gantry Crane presentation
 
Single Girder Gantry Crane is mainly composed of gantry, crane crab, and trolley traveling mechanism, cab and electric control system.
The gantry is of a box-shape structure. The crab adopts vertical reaction wheel when 2,the lifting load is below 20t, and horizontal reaction wheel when above 20t to run at the girder side.

Technical parameters

Construction features
 
1. Metal part
 
This electric hoist gantry crane is mainly composed of the main beam, supporting leg and lower beam.
 
The main beam and lower beam are box structure welded by four steel plates, and the supporting leg is box structure welded by four steel plates.
 
The electric hoist walks directly under the i-steel lower flange plate of the main beam.
 
For convenient storage and transportation, the main beam, supporting leg and lower beam is connected with M20 bolts to become one.
 
2. Electric hoist
 
Wire rope lifting, single speed, with traveling trolley and reducer, drum and motor, include overload limiter switch
 
Protection class F class
 
Drop Forged Hook, Plain ‘C’ type, Swiveling on Thrust Bearing, equipped with belt buckle and wire ropes sheath
 
Nanjing special brand motor, soft start for smooth running, long design service life, the best motor in China
 
Self-produced. Drums made of high-quality seamless steel processed by the CNC machine.
 
Rope guide made of engineering plastic, lightweight, excellent wear resistance, reducing tear and wear of wire rope
 
High-quality wire rope, Strength of extension: 1670 N/m2
 
3. Operating mechanism
 
This product is in the form of separate drive, drive braking by cone rotor motor to complete;
 
Transmission is the use of "one open and one close" gear transmission.
 
4. Electrical equipment
 
Module control speed, micro-speed and double speed;
 
Traveling and lifting smoothly;
 
The power for trolley moving adopts flat cable, sliding smoothly;
 
Control box layout is reasonable, easy to repair;
 
Protection class IP55;
 
Optional main power source ;
 
All external cable line number with the mark;
 
Safety smooth touchline, high conductivity, small pressure drop;
 
Lightweight, installation convenience;
 
Set electric taxi speed is high, ensure continuous power supply;
 
Optional speed control module, and can realize the micro speed and double speed.
 
5. The specification of this product is expressed as follows:
 
(1).Ground controlling
 
Example: lifting weight 5t, span 7m, working-level A3.
 
Representation: MH5-7A3-D JB/t5663-2008
 
D is for ground control.
 
6.rail system:
 
Crane rails, clamp plate & press plate
 
High quality reputed make
 
 
Single Girder Gantry Crane details