|
[China]
Trade Verify
Address: Crane Industrial Park, Changyuan County, Henan Province, China.
Contact name:Jerry
Henan Silence Industry Co., Ltd. |
|
Verified Suppliers
|
|
|
ISO CE Certificated 15 Ton Single Girder Gantry Crane Warranty 1 Year With Cantilever Beam
Product presentation of Single girder gantry crane
The electric single-beam gantry crane model is MH type, supporting CD type single-speed electric hoist, MD type double-speed electric hoist, HC square electric hoist, etc., is a small and medium-sized gantry crane running on rails, its applicable lifting weight is 1T-20 tons, applicable span is 12m-30 meters, the working environment is -20℃-+40℃.There are three types of ground control, cab control and remote control.
Single beam gantry crane is mainly used for loading, unloading, or
grabbing materials in open places and warehouses. It is forbidden
to be used in inflammable and explosive environments. If it is
needed in special environments, it can be customized with
non-standard design.
Technical parameters of Single girder gantry crane
| Capacity | T | 3 | 5 | 10 | 16 | ||
| Span | m | 12,16,20,24,30 | |||||
| Operational method | Pendent Line With Press Button /Cabin/ Remote | ||||||
| Speed | Lifting | 8 ,8/0.8 | 8,8/0.8 | 7,7/0.7 | 3.5 | ||
| Cross travelling | m/min | 20 | 20 | 20 | 20 | ||
| Long travelling | Ground | 20 | 20 | 20 | 20 | ||
| Cabin | 20, 30,45 | 20, 30,40 | 30,40 | 30,40 | |||
| Motor | Lifting | Type /kw | ZD41-4/4.5 | ZD141-4/7.5 ZDS10.8/4.5 | ZD151-4/13 ZDS11.5/4.5 | ZD151-4/13 | |
| ZDS1-4/0.4/4.5 | |||||||
| Cross travelling | ZDY12-4/0.4 | ZDY121-4/0.8 | ZDY21-4/0.8×2 | ZDY121-4/0.8×2 | |||
| Electric hoist | Model | CD1/MD1 | CD1/MD1 | CD1/MD1 | CD1 | ||
| Lifting height | m | 6,9,12,18,24,30 | |||||
| Working duty | A3 | ||||||
| Power supply | 380V 60HZ 3phase AC (According to your demand ) | ||||||
Technical requirements of single girder gantry crane:
1. There should be enough space inside the body of a good girder
lifting machine to facilitate the assembly and installation of
prefabricated beams and working objects.
2. For the convenience of transportation, the company's girder
lifting machine is convenient for disassembly, and does not affect
the stiffness, strength and stability of the main steel structure
of the equipment.
3. The girder lifting machine requires that its two major
components, namely the lifting structure and the speed of the
running structure, be controlled at a relatively low gear. In this
way, the alignment precision of the precast beam can be improved
and the impact on the body and parts of the girder lifting machine
can be buffered.
4. When two girder lifting machines are required to work together,
it is necessary to ensure that the two girders can run and work
synchronously.In order to extend the service life of hoist gantry
crane.
Operational Considerations of single girder gantry crane:
1. Trained qualified operators shall operate according to the
training contents and operation steps.
2. All the staff operating the girder lifting machine must be
trained and qualified, otherwise they cannot be on duty to operate
the machine.
3. To do a good job of the girder lifting machine electrical
devices and other major, easy to wear out parts of regular
post-maintenance and maintenance.
4. No matter any problem is found during operation, please stop the
machine immediately and check it until the problem is eliminated
before continuing operation.
Packing and shipping
1. Electric parts are packed by high quality plywood crate, to
reduce distortion in conveying.
2. Main beams, end beams and trolly/winch are packed by plastic
woven cloth. It can reduce abrasion during the transportation.
3. If the size are suitable for container ship, usually by
container.
4. Big size, usually by bulk ship or by container after truncation.
5. Transport ways are based on reducing cost & keep safety.
