Henan Yuntian Crane Co., Ltd. |
|
Cd / Md Model Wire Rope Electric Hoist
Product Description:
CD type, MD type wire rope electric hoist is a kind of light and
small lifting equipment, which is fixed on winch beam, used for
lifting goods or for crane, gantry crane, cantilever crane and
other industrial and mining crane enterprises.The wire rope hoist
has the advantages of compact structure, light weight, small size,
wide versatility, convenient operation and convenient maintenance.
It can be installed on hoist single girder, bridge crane, gantry
crane, jib crane. With a little modification, it can also be used
for hoisting. Therefore, it is one of the commonly used lifting
equipment in factories, mines, ports, warehouses, freight yards,
stores, etc., and is an essential machine to improve labor
efficiency and working conditions.
The components of the electric hoist are: motor, transmission
mechanism, winding drum and sprocket.Electric hoist structure
reducer: It adopts a three-stage fixed-axis helical gear rotating
mechanism. The gear and gear shaft are made of heat-treated alloy
steel. The box body and box cover are made of high-quality cast
iron, with tight assembly and good sealing. The reducer is a
self-contained part, and it is extremely convenient to install and
remove.
Product Advantages:
1. The operation is safe and reliable.
2. Two-speed adjustment makes the crane run smoothly.
3. Low noise, soft start and stop.
4. Standardized crane configuration of the whole machine makes the
whole machine more stable.
5. Low maintenance cost and long service life.
6. The wheel pressure is small and the volume is small, which can
reduce the investment in the preliminary project such as the
factory building.
7. Wireless infrared detector
8. External hoist, drive unit, rain cover of electric cabinet.
9. Warning indicator light: flashing indicator light and warning
sound.
Difference between CD and MD:
The hoisting speed of the CD type electric hoist is constant speed,
which can meet the general use requirements; the MD type electric
hoist has two hoisting speeds—normal speed and slow speed. When
working at a slow speed, it can meet the requirements of fine
operations such as precision loading and unloading, sand box
clamping, machine tool maintenance and so on. Therefore, the MD
type electric hoist is more widely used than the CD type electric
hoist.
Electric hoist, also known as electric hoist, electric hoist lift.
It retains the light and convenient characteristics of the chain
hoist, and improves the manual operation of the chain hoist and the
slow lifting speed.
Lifting capacity(t) | 0.25 | 0.5 | 1, 2, 3, 5 | 10 | 16 | 20 |
Lifting height(m) | 3, 6, 9 | 3, 6, 9 | 6, 9, 12, 18, 24, 30 | 9, 12, 18, 24, 30 | 9, 12, 18 | 9, 12, 18 |
Lifting speed(m/min) | 8(8/0.8) | 7(7/0.7) | 3.5(3.5/0.35) | 4 | ||
Travel speed(m/min) | 20 | 20/30 | 20 | 20 | ||
Work system | Intermediate FC=25% | |||||
Power source | Three-phase AC 380V 50Hz |