|
[China]
Trade Verify
Address: 3A-8, No. 111, Taizi Road, Shuiwan Community, Zhaoshang Street, Nanshan District, Shenzhen, Guangdong, China
Contact name:Fiona Liang
TIANJIN ESTEL ELECTRONIC SCIENCE AND TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
IP55 Waterproof Electrical Enclosure Boxes 1300mm Galvanized Steel
1. Outdoor Electrical Cabinet Description
This series cabinet is 1300mm High and 720mm Wide and 720mm Deep. it can integrated various types of equipments,such as power distribution unit,enverionment monitoring unit,and etc.The cooling of the cabinet is fan,which is installed on the front door of the cabinet.It can make sure the temperature stable for the equipment operating.The cabinet is configured with fully locking doors to both front and rear faces allowing for access from both sides of the electrical equipment being integrated.
Dimension:720×720×1300mm
The cabinet includes 19” mounting rack from top to down, without battery tray
The cabinet is made of galvanized steel, single wall, thickness: 1.5mm, without thermal insulation
(1) The cabinet is dustproof, sunproof, rainproof, rustproof and theftproof, can be used in outdoor various environment.
(2) High protection level: IP55
(3) Cabinet cooling mode: air conditioner
(4) All the cables used in the cabinet are made from flame retardant materials.
(5) Including grounding copper bar.
(6) Installation mode: floor mount.
(7) Maintenance mode: accessed from the front.
(8) Cabling mode: routed in and out from the bottom.
(9) All the screws&nuts are stainless steel material with high anti-corrosion.
(10)Full protection: door sensor, smoke sensor, water sensor and temperature & humidity sensor, environmental monitoring system provides real alarm
4. Cabinet Parameters
| Cabinet | Outdoor telecom cabinet |
| Material | Galvanized sheet,single wall. |
| Doors | 1 Front door |
| Door lock | Anti-theft door lock |
| Cable inlet | Cable entry holes are at the bottom of the cabinet |
| Heat insulation | Optional |
| installation | 19” rack |
| Thickness | panel adopt 1.5mm |
| Dimension | 1300H*720W*720D mm |
| Cooling method | 220AC air conditioner cooling system |
| Surface treatment | Painting,plasma electrostatic painting,hot galvanized,powder coating, polishing,brushing,etc. |
| Mounting method | Floor mounting type |
| Optional accessories | The door sensor, water sensor, smoke sensor, temperature and humidity sensor |
| Security design | Embedded door, embedded hinges, 3-point security lock |
| IP degree | IP55 |
| Color | RAL7035 |
| Package | Wooden case with pallets |
| Working Temperature | -20~+55ºC |
| Storage Temperature | -40~+65ºC |
(1) Applicable environment conditions:
Operating temperature: -40°C ~ + 55°C
Storage temperature: -50°C ~ + 70°C
Transport temperature: -50°C ~ + 70°C
Relative humidity (RH): 5%~99%
Air pressure: 62kPa ~ 101kPa (similar to 0m ~ 5000m altitude)
(2) Material: good quality galvanized steel
(3) Surface treatment: powder-coat paint, outdoor polyester light gray RAL 7035 coating
(4) Ingress protection: IP55
(5) Flame retardance: comply with GB5169.7 test A
(6) Insulation resistance: the insulation resistance between grounding devices and cabinet body parts is not lower than 2×104M/500V(DC).
(7) Withstand voltage: the withstand voltage between grounding devices and cabinet body parts is not lower than 3000V(DC)/1min.
6. Technics of outdoor equipment cabinet
The cabinet material is high quality steel plate, which is made by the world's leading AMAD CNC equipment, with exquisite workmanship and precise size. The main frame of the cabinet is made by welding, ensuring the whole cabinet is strong and durable. The internal structure and all kinds of accessories are assembled in the way of assembling, and the application is flexible. The cabinet body and its internal accessories are all pretreated by acid washing and phosphating, and then the special molding powder is used for electrostatic spraying, so as to prevent corrosion and rust.
7. Cabinet Picture
8. Cabinet inside Rack
9. Our Factory Introduction
Factory Size: 3000 Square Meters
No. of Main Production Lines: 5
Contract Manufacturing: OEM Service Offered, Design Service Offered, Buyer Label Offered
Production Experience: 10 Year
