Active Member
|
[China]
Address: 3rd Floor, Building B, Sand yuan Po Industrial Zone 1970 Cultural, Minzhi, Shenzhen, China
Contact name:Rachel Liu
Shenzhen Skylynn Communication Co., Ltd. |
|
|
The FOSC is suitable for protecting fiber cable splices in
straight-through and branching applications. It can be placed in
aerial, underground direct buried, wall mounted, manhole and duct
applications.
Based on an advanced formula, the plastic parts are made of
injection-molded, high-strength engineering plastic by numerical
control equipment, therefore effectively preventing products from
aging caused by coldness, heat, oxygen and ultraviolet radiation.
The strong housing and main components provide fire-resistant,
water-proof, and quake-proof while protecting splices during
pulling, tensioning and impacting.
It ensures long-term reliability and usage under ambient
temperature from -40℃ to +80 ℃
Suitable for bunchy & ribbon fibers.
Aerial
Underground
Wall-mounting
Duct-mounting and handhole- mounting
Ambient temperature ranges from –40℃ to +65℃.
FEATURES
Advanced internal structure design
The closure is spacious enough for winding and storing fibers
Flip style fiber splice trays are designed
The curved radius meets with international standard
Easy and fast to increase and reduce splice tray
Innovative elastic integrated seal fitting
With the function of reuse and capacity expansion
Robust long-term environmental stability
Working temperature: –40℃ to +60 ℃
Atmospheric pressure: 70~106Kpa
Normal temperature sealing performance: 72h, internal air pressure 70Kpa, without decrease.
High temperature sealing performance: 60 ℃168h, internal air pressure 70Kpa, without decrease.
Tensile strength: 1000N
Compressive strength: 2000N/10cm2 within 1 min
Insulation resistance: more than 10MΩ between metal parts or between metal parts and the ground
Dielectric strength: 15KV DC, 2min, without spark over and flying arc
Working life: more than 20 years
Outside dimension (Height x Diameter) | 288mm×178mm |
Weight (excluding outside box) | 1800g—1910g |
Number of inlet/outlet ports | 4 pieces |
Diameter of fiber cable | 8mm~16 mm |
Capacity of FOSC | Bunchy: 4-48 (cores) |
No. | Name of components | Quantity | Usage | Remarks |
| 1 | FOSC cover | 1 piece | Protecting fiber cable splices in whole | Height x Diameter 208mm x 132mm |
| 2 | Fiber optic splice tray | Max. 4 trays (bunchy) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: Bunchy:4,6,8,12,(cores) |
| 3 | Fiber holding tray | 1 piece | Holding fibers with protective coat | |
| 4 | Base | 1 set | Fixing internal and external structure | |
| 5 | Plastic hoop | 1 set | Fixing between FOSC cover and base | |
| 6 | Seal fitting | 1 piece | Sealing between FOSC cover and base | |
| 7 | Pressure testing valve | 1 set | After inject air, it is used for pressure testing and sealing testing | Configuration as per requirement |
| 8 | Earthing deriving device | 1 set | Deriving metal parts of fiber cables in FOSC for earthing connection | Configuration as per requirement |
