|
[China]
Trade Verify
Address: Tewang Kejiyuan, Kuiqing Road, Qinghuang Industrial Area, Qingxi Town, Dongguan, Guangdong, China
Contact name:
DONGGUAN TW-SCIE CO., LTD. |
|
Verified Suppliers
|
|
|
100 Span 48 Cores ADSS Fiber Optic Cable
ADSS cable is loose tube stranded. Fibers, 250μm , are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.
Features
1.Can be installed without shutting offthe power.
2.ExcellentAT performance. The maximum inductive at the operating
point ofAT jacket can reach 25kV.
3.Light weight and small diameter reducing the load caused by ice
and wind and the load on towers and backprops.
4.Large span lengths and the largest span is over 200m.
5.Good performance oftensile strength and temperature.
6.The design life span is over 30 years.
Applications
1.Railways and Telecommunications pole route.
2.Low-voltage transmission and distribution system.
3.Long distance and local area network communication.
4.Network in high electromagnetic interfering places.
General Specifications
| Cable Type | ADSS |
| Fiber Type | G652D |
| Application | Long distance telecom, LAN in high voltage area or access to telecom network; |
| Recommended installation methods | Power transmission system, much thunder areas and high electro-magnetic inerference |
| Environment | Outdoor |
| Temperature Range | -40℃ to 70℃ |
| Technical parameter of ITU-T G.652D (B1.3) single-mode optical fiber | |||
| Optical Characteristics | |||
| Mode field diameter (MFD) | 1310nm 1550nm | 9.2±0.4 10.4±0.8 | µm µm |
| Cut-off wavelength (λcc) | ≤1260 | nm | |
| Attenuation coefficient | 1310nm 1383nm 1550nm | ＜0.35 ＜0.35 ＜0.22 | dB/km dB/km dB/km |
| Macro bending loss | φ75mm, 100circles, at 1550nm | ≤0.1 | dB |
| Attenuation non-uniformity | ≤0.05 | dB | |
| Dispersion coefficient | 1288~1339nm 1271~1360nm 1550nm | ≤3.5 ≤5.3 ≤18 | Ps/(nm.km) Ps/(nm.km) Ps/(nm.km) |
| Zero dispersion wavelength | 1300~1324 | nm | |
| Max zero dispersion slope | ≤0.093 | Ps/(nm2.km) | |
| Group index of refraction (typical value) | 1310nm 1550nm | 1.466 1.467 | |
| Geometric characteristic | |||
| Cladding diameter | 125.0±1.0 | µm | |
| Core/cladding concentricity error | ≤0.8 | µm | |
| Cladding non-circularity | ≤1.0 | % | |
| Coating diameter | 245.0±10 | µm | |
| Cladding/coating concentricity error | ≤12.0 | µm | |
| Coating non-circularity | ≤8 | % | |
| Diameter of colored coating | 250.0±15 | µm | |
| Mechanical characteristic | |||
| Curling (radius) | ≥4 | m | |
| Proof stress | ＞0.69 | Gpa | |
| Coating strip force | Average value Peak value | 1.0-5.0 1.3-8.9 | N N |
| Dynamic stress corrosion susceptibility parameter (nd value) | ≥20 | ||
Standard Color Identification of Fiber
| No. | 1 | 2 | 3 | 4 | 5 | 6 |
| Color | Blue | Orange | Green | Brown | Slate | White |
| No. | 7 | 8 | 9 | 10 | 11 | 12 |
| Color | Red | Black | Yellow | Violet | Pink | Aqua |
Cable Design
| Items | Descriptions | ||
| Optical fiber(G.652.D) | 12F | 24F | |
| Loose tube | Material | PBT (Polybutylene Terephthalate) | |
| Fibers per tube | 4 | 4 | |
| Numbers | 3 | 6 | |
| Filler rod | Numbers | 3 | 0 |
| Central strength member | Material | FRP (Fiber glass reinforced plastic) | |
| Water blocking Material | Water blocking yarn | ||
| Additional strength member | Aramid yarns | ||
| Outer sheath | Material | Black HDPE | |
| Thickness | Nominal: 1.6 mm | ||
| Cable nominal diameter(±0.3mm) | 10.0 | ||
| Cable approx. weight (kg/km) | 78 | ||
| Rated Tension Stress (RTS) | 4.5KN | ||
| Maximum working tension (40%RTS) | 1.8KN | ||
| Everyday stress (15-25%RTS) | 0.675-1.125KN | ||
| Allowable maximum span | 100m | ||
| Crush | Short time | 2200N/100mm | |
| Applicable temperature range | Operation | -40℃~+70℃ | |
| Installation | -10℃~+50℃ | ||
| Storage & shipping | -40℃~+60℃ | ||
| Bending Radius | Installation | 20 times of cable diameter | |
| Operation | 10 times of cable diameter | ||
Product Structure
Cable Sheath Marking
Each cable have the following information clearly marked on the
outer jacket of cables:
a. Name of manufacturer.
b. Year of manufacturer
c. Type of cable and fiber
d. Length mark (printing on each meter normally)
e. Or as customer’s requirements.
Exhibition
Certificates
Our Quality & Service
DONGGUAN TW-SCIE CO., LTD. is committed to providing the highest
quality optical fiber cable products & services to our
customers by:
1.Consistently meeting for product quality and performance;
2. Timely delivery of products and services to meet our customer's
requirements;
3. Ensuring that our people are properly trained so that they are
better able to serve our customers.
WE LOOKING FORWARD TO HEARING FROM YOU !
