|
[China]
Trade Verify
Address: Tewang Kejiyuan, Kuiqing Road, Qinghuang Industrial Area, Qingxi Town, Dongguan, Guangdong, China
Contact name:
DONGGUAN TW-SCIE CO., LTD. |
|
Verified Suppliers
|
|
|
4 Core Loose Tube Non - Metallic & Non - Armored Aerial/Duct GYFTY Outdoor Fiber Optic Cable
The fibers are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. After the cable core is filled with the filling compound to protect it from water ingress, the cable is completed with a PE sheath.
| Fiber Type | G.652 | G.655 | 50/125 um | 62.5/125 um | |
| Attenuation | 850 nm | <3.0 dB/km | <3.3 dB/km | ||
| (+20X) | 1300 nm | <1.0 dB/km | <1.0 dB/km | ||
| 1310 nm | <0.36 dB/km | <0.40 dB/km | |||
| 1550 nm | <0.22 dB/km | <0.23 dB/km | |||
| Bandwidth | 850 nm | >500 MHz-km | >200 Mhz-km | ||
| 1300 nm | >500 MHz-km | >500 Mhz-km | |||
| Numerical Aperture | 0.200±0.015 NA | 0.275±0.015 NA | |||
| Cable Cut-off Wavelength cc | <1260 nm | <1450 nm | |||
Fiber Count | Nominal Diameter (mm) | Nominal Weight (kg/km) | Max Fiber Per Tube | Max No. of (Tubes+fillers) | Allowable Tensile Load (N) | Allowable Crush Resistance (N/100mm) | ||
| Short Term | Long Term | Short Term | Long Term | |||||
| 2~36 | 10.2 | 85 | 6 | 6 | 1500 | 600 | 1000 | 300 |
| 38~72 | 11.1 | 100 | 12 | 6 | 1500 | 600 | 1000 | 300 |
| 74~96 | 12.6 | 130 | 12 | 8 | 1500 | 600 | 1000 | 300 |
| 98~120 | 14.1 | 162 | 12 | 10 | 1500 | 600 | 1000 | 300 |
| 122~144 | 15.9 | 204 | 12 | 12 | 1800 | 600 | 1000 | 300 |
Note : This datasheet can only be a reference, but not a supplement to the
contract. Please contact the sales for the details.
Cable is supplied in lengths as specified in PI or as requirement.
Each length will be shipped on a separate iron-wooden drum. The
minimum barrel diameter of the drum will not be less than 30 times
the cable diameter.
The cable ends will be sealed with plastic protection caps to
prevent water penetration. The ends will be easily accessible for
testing. A final inspection test report with attenuation
performance data for each fiber is attached inside the drum.
8. FAQ
Q1: Where is your factory ?
A1: Our factory is located in DONGGUAN City, GUANGDONG Province,
China.
Q2: How long has your company been doing this?
A2: More than 20 years.We are not only produce fiber optical cable
but also produce optical fiber and related tools .
Q3:How about the cable's quality?
A4: Our factory is approved by ISO9001 quality management system
and including STARF,CE,CPR,TLC certifications at list.We have a
series of equipment and instruments to make sure reliable quality
of our products.
Q4: Can you produce cable as our requirements?
A6: Of course .We can supply different types of products according
to your requirements with reasonable prices .
Q5:Do you accept the OEM order and how many is the MOQ?
A7:Yes,we warmly welcome your OEM order.To achieve customer's
satisfaction,we accept sample order, even one Piece.
