|
[China]
Trade Verify
Address: NO.9, Hongfeng 1st Street, Nanshe Village, Chashan Town. Dongguan City, 523391, China
Contact name:Aaron
Dongguan Ruichen Sealing Co., Ltd. |
|
Verified Suppliers
|
|
|
| NBR 70 TEST REPORT ASTM D2000 M2BG 714 B14 EO14 EF11 EF21 EA14 F17 | |||
| PROPERITIES | SPECIFICATION | TEST RESULT | TEST METHOD |
| Hardness shore A | 70±5 | 72 | D2240 |
| Tensile MPA Min | 14 | 14.5 | D12 |
| Elongation % Min | 250 | 315 | D412 |
| Gravity | 1.263 | D297 | |
| Heat resistant 70h 100℃ Hardness change | ±15 | ﹢5 | D573 |
| Tensile strength% | ±30 | ﹢15 | |
| Elongation Max | -50 | -12 | |
| Compression Max 22h at 100℃ | 25 | 14 | D395 |
| NO1 oil resistant | |||
| Change in hardness | -10~+5 | +1 | D471 |
| Change in tensile Max | -25 | -16 | |
| Change in Elongation | -45 | -20 | |
| Change in Volume% | 0~25 | +6 | |
| Fuel resistant 70 H at 23℃ | |||
| Hardness change | ±10 | +3 | D471 |
| Tensile change Max | -25 | -8 | |
| Elongation change Max | -25 | -10 | |
| Change in Volume | -5~+10 | +3 | |
| Water Resistant | D417 | ||
| Change in Hardness | +3 | ||
| Change in tensile | +5 | ||
| Change in Elongation | -14 | ||
| Change in Volume | ±15 | +3 | |
| Low Temperature resistant | D2137 | ||
| 3 MIN -40℃ | Non brittle | Pass | D2137 |
Products Show:
Process Flow:
Raw material test → Prescribe → Mixing Material → Cutting Material → First Cure → First Part Inspection → Casual Inspection
→ Burr Dealing → Eye Inspection → IPQC → Washing or Grinding → Post Cure → FQC → Packing
Packing & Delivery:
Packing: PE bag inside, Carton outside.
Carton size: 46cm*34cm*34cm,40cm*34cn*34cm 51cm*34cm*34cm, 29cm*23cm*19cm
Delivery: Large quantity by ship, small quantity by air or express.
FAQ:
1, Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao
City,
Jiangxi Province, one in Dongguan City, Guangdong Province
2, Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you
can get them for free,
only need to pay for the express cost.
3, What's the term of payment ?
Amount < US$2000, 100% paid in advance by paypal or T/T;
Amount >= US$2000, 30% paid in advance, 70% balance before
shipment by T/T.
4, Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5, What's your MOQ ?
If we have the products in stock , the quantity by your
requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$
