|
[China]
Trade Verify
Address: NO.9, Hongfeng 1st Street, Nanshe Village, Chashan Town. Dongguan City, 523391, China
Contact name:Aaron
Dongguan Ruichen Sealing Co., Ltd. |
|
Verified Suppliers
|
|
|
Translucent Good Elongation Clear Silicone FDA o-ring for Coffee Machine
1.The O-ring is an annular seal having an O-shaped cross section, the size of which is determined
by the inner diameter ID and the wire diameter CS.
2.O-ring size calculation: outer diameter = inner diameter + 2 x wire diameter (OD = ID + 2x CS).
3.The purpose of using O-ring seals is to prevent leakage and loss
of liquids or gases.
4.O-rings are the most commonly used type of seal because of their
simplicity, convenience, and
small installation space. As long as the groove design and material selection are correct, and the
operating conditions are within the temperature range of the rubber material, the seal can have a
long-term sealing effect in the static or dynamic seal.
For Silicones the service temperatures are from -60 ℃ to 225 ℃. Some special types can be used in extreme
temperatures up to 300 ℃ and down to -100 ℃.
Silicone rubber performs well under environmental and temperature extremes. It is usually applied in automotive
and aerospace industries where flexibility and longevity are important. It is also a suitable material for parts that
need food grade for food handling equipment and appliances.
| Material | SIL(Silicone Rubber) |
| Advantage | 1,Excellent Rebound Resistance |
| 2,Excellent Oxygen and Ozone Resistance | |
| 3,Excellent Weathering and Heat Resistance | |
| 4,Excellent Heat and Low Temperature Resistance | |
| 5,Good heat insulation and heat dissipation. | |
| 6,Good electrical insulation | |
| Disadvantage | 1,Poor Aliphatic-solvent Resistance |
| 2,Poor Alkaline Resistance | |
| Temperature | -40℃-220℃, -100℃-250℃(special formula) |
| Application | 1,the household appliances industry seal or rubber parts, such as electric kettle, electric irons, microwave oven rubber parts. |
| 2,The electronics industry seal or rubber parts, such as mobile phone keys, shock pad DVD, cable joint seal etc. | |
| 3,Contact with the human body on various types of products on the seal, such as water bottles, water dispensers |
Detasheet-Silicone70 Translucent(S7013 ).pdf
Function of the Silicone o ring
A: Rubber O-ring seals - for binoculars, tools, automobiles, garage, plumbers, machinery, plant,
repair, air and gas connected.
B: For professional pipe, sealing pipe and sewer repair leaks family,
bathtub, septic tanks,
hydraulic, air and gas connections, etc..
C: Oil, coolant, power steering fluid, washer fluid, Use for mechanical,grease applications.
E: O rings are also widely used by professional mechanics and DIY car owners to fix engine leaks
and other leaks like oil, coolant, power steering fluid, washer fluid, etc. Use for mechanical/grease
applications.
Our Factory
Rui Chen Sealing Co., Ltd was built in 2006, now there are more than 200 staff. The company has two branches
in Guangdong and Jiangxi, They are Dongguan Rui Chen Sealing Co., Ltd. and Shangrao Rui Chen Sealing Co., Ltd..
In recent years, the company has been supported by ShangRao municipal government and fully enjoy all the
preferential policies for economic development zone. We will always take "best quality, best service" as our
mission, and make progress together with you, harmony and mutual win!
Certificates
Progress
FAQ
Q: 1 What kinds of materials can you provide?
A: NBR, EPDM, SILICONE,FKM(FKM),NEOPRENE(CR), HNBR ,NR, IIR, SBR,
ACM, AEM,Fluorosilicone(FVMQ),
FFKM etc.
Q: 2 How to select the raw compound for my application?
A: With years of experience working with a variety of material, we
can help select the material that will best suit your
needs while keeping material costs in mind.
Q: 3 How long can we get the quote?
A: If your information is complete, we will provide the quotation
within 8 hours.
Q: 4 Can you provide samples? Is it free or extra?
A: Yes, we can provide samples for free. Freight can be negotiated.
Q: 5 What is the normal lead time for product orders?
A: If the stock generally takes 3-7 days, mold about 15-18 days, no
mold about 25-30 days, depending on the product
situation.
Q: 6 How to check the quality of the bulk order?
A: We have incoming inspection, control the quality of raw
materials, process inspection,to ensure the quality of the
production process, shipping 100% of the full inspection; automatic inspection machine full inspection, and according
to customer needs before the mass production of pre-production samples.
Q: 7 What is your standard packing?
A: Plastic bag for inner packing .carton box for outer packing also
be packed according to customer's requirements.
Q: 8 What's the payment term?
A: We accept T/T 30% deposit and 70% balance against copy of B/L or
L/C at sight, Paypal is also accepted.
