|
[China]
Trade Verify
Address: No.368 Youyi Street, Xinhua District, Shijiazhuang City, Heibei, China
Contact name:
Shijiazhuang Hanjiu Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
2P80 G1,2 Monoblock Hydraulic Directional Control Valve
Manually or mechanically controlled hydraulic directional control valve 02Р80 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is manufactured with 1 to 7 plungers, with parallel or serial action, with common or individual back valve for each plunger, with or without safety valve.
Р80 is a mono-bloc distributor. Its body is made of cast iron EN-GJL300. Plungers are made of carburized steel with hard chrome plating.
The distributor is fixed with two bolts M8
| Ambient temperature | -40C...+60C |
| Viscosity | 12 ...800 mm2/s |
| Fluid temperature | -15C...+80C |
| Filtration | 10 to NAS 1638 |
| Max operating pressure | 315 bar |
| Back pressure | 50 bar |
| Nominal flow | 80 l/min |
| Leakage(A,B-T) | 15cm3/min at 120bar |
| Spool stroke | +/-7 mm |
| Actuating force | < 200 N |
| Modification/ Spools | up to 8 |
Application:
This product is applicable to special vehicles like truck mounted
crane, wrecker, scrubbing machine and dynamic compactor and can
effectively control such actuating mechanisms like motor and oil
cylinder.
