China Kingmax Industrial Co.,ltd. |
Verified Suppliers
|
|
Konmax Cold Drink Dispenser Description:
Konmax Cold Drink Dispenser Specification:
Model | LRSPD-18L×3 |
Voltage | 220-240V/110-115V |
Frequency | 50/60/HZ |
Cold poqer | 320W |
Heat poqer | 1500W |
Cold-beverage temperture | 7C-12C |
Hot-beverage temprture | 52C-58C |
Shape size | 710×440×720 |
Carton Packing | 750×480×750 |
Weight | 40 |
Gross weight | 42 |
Konmax Cold Drink Dispenser Detailed Photo:
How to use the cold beverage machine
1.To fall prepared beverage into the crock , the height of it is
should not exceed the standard height (9L-12L-18L-20L-50L),
otherwise the beverage will flow into the churn-dasher from the
dasher tube,which will make the dasher burn .
2.The temperature of the beverage should not too high (not exceed
35), otherwise it will make bad effection for the refrigeration .
3.Plug in the supply power to the 3 hole socket , the grounding
hold should connect with the protecable wire or fixture to ensure
the safety .
4.To turn the switch on the position of refrigeration , press down
the refrigeration switch , the compressor fan starts running and
refrigeration system starts working .
Then start the dasher to mix or start the spewing swtich to spew.
5.When the beverage becomes to the suitable temperature , please
make the cup against the push board lightly .the beverage will flow
into the outlet mouth .
6.when the temperture reduces to the certain degree , the
refrigeration will stop running because of the influence from the
temperature cotroller .And when it increases, it will start
automatically again .
7.It should re-start after 5 minuters if it turn off suddenly or
stop temporarily .otherwise it will damage the compressor .
Konmax Cold Drink Dispenser Youtube Operation Link :