China Kingmax Industrial Co.,ltd. |
Verified Suppliers
|
|
Desk Top Fresh Orange Juice Squeezer With Stainless Steel Touch pad
Konmax Orange Juicer Machine Specification:
1.Power supply:220--230V 50HZ /110--120V 60HZ
2.Power consumption:120W
3.Size of orange required:40--80mm
4.Output: 22-25 oranges/per minute
5.Machine Size: 400L*300W*770H mm(length*width*height)
6.Net Weight: 42kg
7.Security: Safety cut out switches
The machines will stop operating without the cover place.
8. ConVeyance: Qty/20' FCL: 120sets
Material | Stainless steel | Delivery time | 20FT: 10days; 40HQ: 15days |
Width | 300MM | Length | 400MM |
Height | 770MM | Model | XC-2000E-2 |
orange size | 40--80mm | Output | 22-25 oranges/mins |
Package size | 410*310*780MM | Certificate | CE approval available |
Electrics Standard | 110V-220V,50-60HZ | Power | 120W |
G.W | 48KG | N.W | 42KG |
40' HQ loading | 290PCS | FOB Shanghai | USD |
20' FT loading | 120PCS | Warranty | 1 Year |
Konmax Orange Juicer Machine Detailed Photo:
Konmax Orange Juicer Machine Accessory:
A pair of peeling implement(two),one of 5A fuze,one of cross implement, one of 8-10mm spanner,one of electronic supply.
Konmax Orange Juicer Machine Operation Steps:
Connect the power plug to grounded electrical outlet and put the
juice machine on a stable table (make sure electric pressure is
above 10 AMP ).Turn on the power switch .The machine is ready .Wash
and cut the fruit and vegetables ,put them into the feed-in mouth
.Use pushing stick to push then into the machine .The juice will
flow out and residue will spurt from residue outlet .
1.Make sure the power pressure is 110v/60hz or 220v/50hz
.Electrical outlet needs to be above 10AMP and have grounded power
.
2..Put 2 pcs peg in the net and blade of the machine , screw the
nut and close the cover .
3.This machine is not workable for the fruit with hard core or less
moisture , such as peanut and banana .
4..Use the enclosed feed stick but not other stick to avoid damage
the machine .
5. Keep the residue outlet un-blocked .
6..Do not clean the outside of the machine by water directly to
avoid electricity leakage or other accident .
7.Turn off the power and pull out plug before washing the machine
Cleaning Instruction:
1.Begin by unplugging the juicer.
2.Disassemble the juicer completely.
3.Dump the bin or container that catches the pulp and scrape it out
with a spatula.
4.Rinse each piece under running water.
5.Use the small brushes to clean the small areas, there are small
brushes available such as nail brushes
that can be used to clean the nooks and crannies.
6.For more thorough cleanings, fill the sink with water and add
dish soap.
7.Soak each piece for a few minutes and then wash with a brush or
soft cloth.
8.Pay special attention to the mesh strainer as this can quickly
build up with pulp and juice debris. Do not
allow the juice particles to dry in this fine screen or they
will be difficult to remove.
9.Use a soft cloth or sponge moistened with water to wipe down the
machine itself. Although the juice is
designed to go through a certain route in the juicer, juice
and pulp will end up everywhere.
10.Allow all of the pieces to dry completely. It is fine to set
them on a towel or drying rack.
11.Reassemble the juicer.
Konmax Orange Juicer Machine Youtube Link Please check :