China Kingmax Industrial Co.,ltd. |
Verified Suppliers
|
|
Commercial Stainless Steel Fruit Juice Dispenser 18 Liter With Imported Compressor
Konmax Cold Drink Dispenser Description:
Frozen drink dispensers are a versatile addition to any snack
shack, concession stand, convenience store, gas station, or bar.
These granita machines are perfect for making a variety of
products.
1.The machine can make hot and cold milk, fruit juice and other hot
and cold drinks, easy to use, clean and it is an ideal equipment
for the catering industry.
2.This machine adopts stainless steel evaporator, heat transfer
effect is good or cool down fast. 3.This machine has small size,
light weight, low power consumption, easy operation and so on.
4.Food-grade high-density crack PC capacity tank, safe, easy to
clean
5.Split out the material switches to ensure that pollution-free
frozen drinks.
6.Humanized design, computer control panel, 304 # stainless steel
shell, beautiful and durable
7.Spray-type design, application and strong bond, particle big
drinks, such as soy milk, pearl milk tea and so on.
8.Power, voltage, frequency is up to the customer's requirements.
9.Wrap-around stainless steel evaporator, cooling the strong rapid
temperature equilibrium.
10.Closed-end high back pressure compressors, energy-saving quiet,
noise less than 55db
11.Using R134A refrigerant, anaerobic environment .
Konmax Cold Drink Dispenser Application:
Hotel ,restaurant,store , supermarket,drink bar etc
Konmax Cold Drink Dispenser Specification:
Material | Stainless steel R304 | Machine size | 480*460*740MM |
power | 280/600W | Packing size | 510*470*750MM |
Cold-beverage temperture | 7 to 12 degree | Hot-beverage temperature | 52 to 58 degree |
Tank material | PC | Model | LSJ 18 LX2 |
Condenser | with Copper tube | Certificate | CE |
switch | LCD switch | Packing Way | Carton +foam inside |
Electrics Standard | 110V-220V,50-60HZ | Drive Mode | Magnetic rotating |
G.W | 31KG | N.W | 29KG |
40' HQ loading | 425PCS | FOB Shanghai | USD |
20' FT loading | 165PCS | Warranty | 1 Year |
Konmax Cold Drink Dispenser Detailed Photo:
Food grade material PC tanks and large capacity 36 liters in total ,each tank can have different flavours .
Humanized handle design
According to the ergonomic design, after a lot of investigation and
rectification, the handle is more scientific and durable, and the
spring is used to return to the position, which is easier and more
convenient to use.
Easy press buttons and seperate tank working method , you can choose mixing , spraying , cooling , heating functions .
How to use the cold beverage machine?
1.To fall prepared beverage into the crock , the height of it is
should not exceed the standard height (9L-12L-18L-20L-50L),
otherwise the beverage will flow into the churn-dasher from the
dasher tube,which will make the dasher burn .
2.The temperature of the beverage should not too high (not exceed
35), otherwise it will make bad effection for the refrigeration .
3.Plug in the supply power to the 3 hole socket , the grounding
hold should connect with the protecable wire or fixture to ensure
the safety .
4.To turn the switch on the position of refrigeration , press down
the refrigeration switch , the compressor fan starts running and
refrigeration system starts working .Then start the dasher to mix
or start the spewing swtich to spew.
5.When the beverage becomes to the suitable temperature , please
make the cup against the push board lightly .the beverage will flow
into outlet mouth .
6.when the temperture reduces to the certain degree , the
refrigeration will stop running because of the influence from the
temperature
cotroller .And when it increases, it will start automatically again
.
7.It should re-start after 5 minuters if it turn off suddenly or
stop temporarily .otherwise it will damage the compressor .