|
[China]
Trade Verify
Address: Room 2613, building a, Paradise Plaza, Kehua North Road, Wuhou District, Chengdu, Sichuan, China
Contact name:Amy
Chengdu I-ReHealth Medical Devices Co., Ltd |
|
Verified Suppliers
|
|
|
Light curing discoloration 1.2g Pit And Fissure Sealant For decay Teeth With Pink Color
【Product name】
pit and fissure sealant
[model]
purple, pink, blue, white
[Specification]
1.2g/bottle, 1.2mL/bottle, 1.5g/bottle, 1.5mL/bottle, 3g/bottle, 3mL/bottle, 5g/bottle, 5mL/bottle
Product Information:
| Name | Pit And Fissure Sealant |
Package | 1.5g |
| Color | Pink |
Warranty | 3 Years |
| Approved | ISO |
【Contraindications】
* Those who have a history of allergies to the ingredients in this
product are prohibited.
The Pit & Fissure Sealant Procedure
It is highly recommended that sealant application be performed as a
two-person procedure. Even when the patient is an adult, isolation
and application are difficult with just one dental clinician.
Prior to the application of a tooth conditioner, the tooth surface should be cleaned by air polishing, polishing with non-fluoridated pumice paste, hydrogen peroxide, or enameloplasty. All heavy stains, deposits, debris and plaque should be removed. After cleaning the occlusal surface, dry the area thoroughly.
【How to use】
1. Clean the face: install a small brush on the low-speed mobile
phone, thoroughly clean the pits and fissures of the face to be
sealed, and then use water
Rinse the gun thoroughly. After cleaning the tooth surface, use
cotton gauze balls to prevent moisture, and dry the tooth surface
and keep it dry.
2. Acid etching, rinsing and drying: It is recommended to use
phosphoric acid gel with a phosphoric acid content of not less than
35% for acid etching.
The time is generally 20-30 seconds, and the mammary glands are
etched for 60 seconds. Be careful not to wipe the etched surface
during the etching process, as this will damage the
Acid-etched stone glaze reduces adhesion.
3. Apply sealant: unscrew the sealing cap of the pit and fissure
sealant, install the Denko flushing needle or the Denko delivery
head, and gently push the delivery
Apply the pit and fissure sealant directly on the pit and fissure
with the push rod of the device. When applying pit and fissure
sealant, care should be taken to discharge air bubbles and
The sealant coverage is smaller than the etched side and as thick
as possible without compromising the occlusion. sometimes may
High, but wears off after 2-3 days. If the coating is too thin, it
will lack sufficient compressive strength and be easily crumbled.
4. Curing: After coating, irradiate the pit and fissure sealant
with a light curing machine (lamp) for 20-40 s.
The wavelength should cover 420-480 nm, and the irradiance (light
intensity) should not be less than 1000 mw/c㎡, and those with large
areas should be irradiated in stages.
This product does not flow after curing, and forms a thin, hard
milky white film on the surface of the carcass, which is easy to
observe.
5. Inspection: After the sealant is cured, conduct a comprehensive
inspection with a probe. Check degree of cure, adhesion, presence
of air bubbles
In, look for missing or unsealed fissures and reseal. Observe for
excess occlusion material and whether it needs to be removed,
If problems are found, they should be dealt with in time; check the
occlusal relationship, and adjust the grinding if the sealant is
too thick.
Company Profiles:
Chengdu I-ReHealth Medical Devices Co., Ltd is a high-tech R&D and manufacturing company focusing on the oral health field (medical materials and medical devices). Founded in 2016, it is located in the beautiful "Tianfu Kingdom"-Chengdu.
Based on the dental industry, I-ReHealth develops a strategic layout and is committed to providing customers with high-quality oral medical solutions. The company has formed a long-term and in-depth cooperation relationship with the West China Hospital of Stomatology.
FAQ:
1.How can I get the price?
