Sichuan Aitong Wire & Cable, Inc. |
Verified Suppliers
|
|
Flame retardant FRP strength members Single mode GJXFH-1B FTTH Fiber Optic Cable
▌Product description
Butterfly optical cable is a new type of user access optical cable.
According to different application environment and laying
conditions, the optical cable structure and various technical
parameters are reasonably designed, which integrates the
characteristics of indoor soft optical cable and self-supporting
optical cable, and uses special equipment to cooperate with
imported precision mold production. It is the best alternative
product for FTTx network solution and plays a unique role in the
establishment of intelligent building, digital community, campus
network, LAN and other networks.
The optical cable has the advantages of small outer diameter, light
weight, low cost, good flexibility and bending performance, and is
widely used. It is light and easy to lay, low construction cost,
fast, flexible and fast. The optical cable has high compressive
flat force and tension resistance, and the self-supporting
structure can meet the flying span setting below 50m. FRP
reinforcing materials shall be used to ensure the safety
requirements for lightning stroke and strong current environment
when the optical cable is used outdoors. Halogen free flame
retardant materials are adopted to meet the requirements of flame
retardant performance for indoor use of optical cables. The tight
sleeve structure not only makes the product free of ointment
pollution, but also has good waterproof requirements.
▌Application
▌Characteristics
▌Optical Characteristics
Fiber Type | Attenuation | Overfilled launch Bandwidth | Effective Modal Bandwidth | 10GB/S Ethernet link length | Min Bending Radius | |
Conditions | 1310/1550nm | 850/1300nm | 850/1300nm | 850nm | 850nm | |
Unit | dB/km | dB/km | MHZ.km | MHZ.km | m | mm |
G652D | 0.36/0.22 | 16 | ||||
G657A1 | 0.36/0.22 | 10 | ||||
G657A2 | 0.36/0.22 | 7.5 | ||||
50/125 | 3.0/1.0 | ≥500/500 | 30 | |||
62.2/125 | 3.0/1.0 | ≥200/500 | 30 | |||
OM3 | 3.0/1.0 | ≥1500/500 | ≥2000 | ≥300 | 30 | |
OM4 | 3.0/1.0 | ≥3500/500 | ≥4700 | ≥550 | 30 | |
B1-OM3 | 3.0/1.0 | ≥1500/500 | ≥2000 | ≥300 | 7.5 | |
B1-OM4 | 3.0/1.0 | ≥3500/500 | ≥4700 | ≥550 | 7.5 |
▌Structure and Technical Specifications
Fiber Count | Cable Diameter (mm) | Cable Weight (kg/km) |
(N/100mm) | Crush Resistance (N/100mm) | |||
Short Term | Long Term | Short Term | Long Term | ||||
1-4 | 3.0*2.0 | 9.0 | 80/200 | 40/100 | 1000/2200 | 500/1000 |
Note :
1.This datasheet can only be a referance,but not a supplement to the contract,Please contact our sales people for
more information.
2.The cable core use the colored coating fiber of 250μm.
3.The tensile and crush of the cable are accordance with the values in the table when the strength member of FRP and Steel are used
▌We produce and test cable compl with following standard
Mechanical Performance | |
Max Tension Performance | IEC 60794–1-2-E |
Max. Operation Tension | IEC 60794–1-2-E1 |
Crush Test | IEC 6079 –1-2-E3 |
Impact Test | IEC 60794–1-2-E4 |
Repeated Bending | IEC 60794–1-2-E6 |
Torsion Test | IEC 60794–1-2-E7 |
Cable bend | IEC 60794–1-2-E11A |
Attenuation Coefficient | ITU-T G.652 |
Structural Test | IEC-60793-1-20 |
Environmental Performance | |
Temperature Cycling | IEC 60794–1-2-F1 |
Water Penetration | IEC 60794–1–2-F5B |
Filing Compound Flow | IEC 60794-1-E14 |
Part Number | Drop Cable GJXFH Single Mode Outdoor Aerial Optic FTTH Fiber Cable | |
Fiber Count | 1/2/4 core | |
Strength Member | Two parallel FRP/Steel wire | |
Cable Dimension (WxH approx.) | (2.0±0.2)x(3.0±0.2)mm | |
Out Jacket | LSZH | |
Out Jacket color | black or white | |
Application | FTTH cable (Fiber to the home), used indoor, Access network |
Items | Unit | G.657A1 Specification | |
Mode Field Diameter | 1310nm | μm | 9.0±0.4 |
1550nm | μm | 10.1±0.5 | |
Cladding Diameter | μm | 124.8±0.7 | |
Cladding Non-Circularity | % | ≤0.7 | |
Core-Cladding Concentricity Error | μm | ≤0.5 | |
Coating Diameter | μm | 245±5 | |
Coating Non-Circularity | % | ≤6.0 | |
Cladding-Coating Concentricity Error | μm | ≤12.0 | |
Cable Cutoff Wavelength | nm | λcc≤1260 | |
Attenuation (max.) | 1310nm | dB/km | ≤0.35 |
1550nm | dB/km | ≤0.21 | |
Macro-Bending Loss | 1turn×10mm radius@1550nm | dB | ≤0.75 |
1turn×10mm radius@1550nm | dB | ≤1.5 |
NO. | Item | Requirement | |
1 | Allowable Tensile Strength | Short Term | 80N |
Long Term | 40N | ||
2 | Allowable Crush Resistance | Long Term | 1000 (N/100mm) |
Long Term | 500 (N/100mm) | ||
3 | Minimum Static Bend Radius | 10 times | |
4 | Minimum Dynamic Bend Radius | 20 times | |
5 | Operation Temperature | 40℃~+70℃ | |
6 | Nominal Cable | Diameter | (2.0±0.2)x(3.0±0.2)mm |
Weight | 9.2kg/km | ||
7 | Fiber Color Code | 01- Blue, 02- Orange, 03- Green, 04- Brown |
▌Product mix
▌Application scenario
▌Standard Color Identification of Fiber
No. | 1 | 2 | 3 | 4 |
Color | Blue | Orange | Green | Brown |
▌Cable Design
Item | Description |
Model No | GJXH/GJXFH |
1. Fiber count | 1 Core , 2 Core, 4 Core |
2. Cable Diameter | 3.0*2.0mm |
3. Cable Weight | 11.5KGS/9.5KGS |
4. Strength member | |
-Material | Steel/FRP |
-Diameter | 0.45mm |
5.Outer Sheath | |
-Material | LSZH (Black/white) |
6. Sheath marking | |
-Type of marking | Laser printing |
▌Packing
Items | Description | |
Cable length | 1KM or 2KM per reel | |
Package material | drum+carton | |
Package size | 1KM | 31.5*21*32.5cm |
2KM | 34.5*28*35cm |
FAQ
Q1: Where is your factory ?
A1: Our factory is located in DONGGUAN City, GUANGDONG Province,
China.
Q2: How long has your company been doing this?
A2: More than 20 years.We are not only produce fiber optical cable
but also produce optical fiber and related tools .
Q3: How about the cable's quality?
A4: Our factory is approved by ISO9001 quality management system
and including STARF,CE,CPR,TLC certifications at list.We have a
series of equipment and instruments to make sure reliable quality
of our products.
Q4: Can you produce cable as our requirements?
A6: Of course .We can supply different types of products according
to your requirements with reasonable prices .
Q5: Do you accept the OEM order and how many is the MOQ?
A7: Yes,we warmly welcome your OEM order.To achieve customer's
satisfaction,we accept sample order, even one Piece.