|
[China]
Trade Verify
Address: 51 Bohai Road, Jingyang District, Deyang City, Sichuan Province
Contact name:Vanessa Ma
Sichuan Aitong Wire & Cable, Inc. |
|
Verified Suppliers
|
|
|
Opgw Aeirlal Wire 16 Core Single Mode G652d OPGW Fiber Optic Cable
▌Product description
OPGW optical cable, namely optical fiber composite overhead ground wire, the optical fiber is placed in the overhead high voltage transmission line ground wire, used to form the optical fiber communication network on the transmission line, both ground wire and communication dual functions. It is mainly used for communication lines of 35kV and above newly-built overhead high voltage transmission system, and can also be used to replace existing ground lines of old overhead high voltage transmission system, increase optical communication lines, conduct short circuit current and provide protection against lightning strike.
▌Characteristic
1. For lines with high voltage exceeding 110KV, the span is large
(generally more than 250m);
2. It is easy to maintain and solve the problem of line crossing,
and its mechanical characteristics can meet the requirements of
line crossing;
3. The outer layer of OPGW is metal armor, which has no impact on
high-voltage corrosion and degradation;
4. OPGW must be powered off during construction, and the power loss
is large, so OPGW should be used in new high-voltage lines above
110kV; 5. In the performance indicators of OPGW, the greater the
short-circuit current, the more it needs to be armored with good
conductors, the tensile strength will be reduced accordingly. When
the tensile strength is certain, to improve the short-circuit
current capacity, only increase the metal cross-sectional area,
resulting in cable diameter and cable strength The weight
increases, which puts forward the safety problem for the strength
of the line tower.
▌Application scenario
State Grid, wind power generation, thermal power generation, photovoltaic power generation, transmission and distribution power station, etc Control and communication syste
| Items | Opgw Aeirlal Wire 16 Core Single Mode G652d OPGW Fiber Optic Cable |
| Structure | Stainless steel loose tube |
| Feature | The OPGW uses stainless steel loose tube structure, increasing its reliability and |
| the performance of temperature-resistant. | |
| The OPGW meets the requirement of large fiber line application. | |
| The OPGW are specially applied for the optical communication system | |
| while installing the electric transmission line. | |
| Project design (sag-tension calculation, short circuit current, ADSS hardware fittings calculation) | |
| Excellent stainless steel tube stranding technology make the fibers have | |
| good secondary excess length and allow the fibers free movement in the tube. | |
| Which keeps the fiber stress-free while the cable is subjected to longitudinal stress. | |
| Cable diameter and weight approximate with another ground wire. Less additional load to tower, | |
| high tensile strength. | |
| ACSW, AAW and SST stranded design provide wide range combination of electrical conductivity | |
| and mechanical tensile strength. |
▌Standards
| ITU-TG.652 | Characteristics of a single mode optical fiber |
| ITU-TG.655 | Characteristics of a non-zero dispersion -shifted single mode fibers optical |
| EIA/TIA598 B | Col code of fiber optic cables |
| IEC 60794-4-10 | Aerial optical cables along electrical power lines-family specification for OPGW |
| IEC 60794-1-2 | Optical fiber cables -part test procedures |
| IEEE1138-2009 | IEEE Standard for testing and performance for optical ground wire for use on electric utility power lines |
| IEC 61232 | Aluminum -Clad steel wire for electrical purposes |
| IEC60104 | Aluminum magnesium silicon alloy wire for overhead line conductors |
| IEC 61089 | Round wire concentric lay overhead electrical stranded conductors . |
▌Typical design for Double Layer
| Specification | Fiber Count | Diameter(mm) | Weight (kg/km) | RTS(KN) | Short Circuit (KA2s) |
| OPGW-96[121.7;42.2] | 12 | 13 | 671 | 121.7 | 42.2 |
| OPGW-127[141.0;87.9] | 24 | 15 | 825 | 141 | 87.9 |
| OPGW-127[77.8;128.0] | 24 | 15 | 547 | 77.8 | 128 |
| OPGW-145(121.0;132.2) | 28 | 16 | 857 | 121 | 132.2 |
| OPGW-163(138.2;183.6) | 36 | 17 | 910 | 138.2 | 186.3 |
| OPGW-163(99.9;213.7) | 36 | 17 | 694 | 99.9 | 213.7 |
| OPGW-183(109.7;268.7) | 48 | 18 | 775 | 109.7 | 268.7 |
| OPGW-183(118.4;261.6) | 48 | 18 | 895 | 118.4 | 261.6 |
▌Product diagram
 |  |
▌Packaging
 |
1. Standard Packaging: b. Standard Code(Product Type, Fiber Type,Fiber Count) | Our Service: 1. We are the one of biggest manufacture of fiber optic cable in China and has more than 10 years manufacturing and selling experience. 2. We accept OEM. The cable size and material are customized. Ur own logo and own design are welcome. We will produce according to your requirment and description; 3. Please send us inquiry for more products info and we will give you feedback in 12 hours. |
▌FAQ
1. Are you the real manufacturer?
Us. We are the real manufacturer with 23 year’s history.
2. What’s the MOQ?
Us. The MOQ of Fiber Optic cable is 10km.
3. What’s delivery time?
Us. The general delivery time is 5-7 days after order confirmed. It
depends on the order quantity.
4. How to Store the Optical Fiber Cable Properly?
Us. Store the drum indoor before using, the drum should place
sideways not on the end.
5. Can you supply customized products and logo?
Yes. We supply OEM service. You can send us your drawing.
6. What’s your payment terms?
Us. We accept T/T,L/C,Western Union,D/P etc. 10% in advance and 90%
before shipment.
