ODF Wall Mount Fiber Enclosure Distribution Box FC 72F 72 Port Single Door

Indoor Wall Mount Odf Fiber Optic Distribution Box 72 Port Single Door

product introduction

   Indoor Wall-mount Fiber Optic Distribution Frame can manage both single fiber and ribbon & bundle

   fiber cables for indoor using. There are FC, LC, SC, ST output interfaces optional, and large working

   space to integrate the pigtails, cables and adapters.

   Box integrates fiber splicing, storage and cable connections together in a unit.

   They can manage both bundle type and ribbon type fiber  cables. It is with large working space to integrate the pigtail,

   cables and adapters    for fiber management.

   This fiber optic distribution frame is designed for outdoor wall mounted using, cold-roll steel, with adapter

   plate & splice trays at one side for fiber splicing, distribution and management.

Features

•  It is composed of case body, fiber optical splice tray and adaptor fixing frame.
•  Surplus fibers can be twisted around two special plastic rings, which ensure the bending radius is bigger than 40mm.
•  Adopt 6 ports adaptor fixing frame to fix adaptors which available for different types of adaptors, easy for operation and avoid  any unexpected damage to fiber.
•  Cable can lead in from the bottom of the box, the entry is under the protection of special rubber parts.
•  ABS plastic tray inside, 12cores per tray.
•  Splice trays in one side or both sides available.
•  Different adapter plate available: FC, SC, LC, ST…
•  Cable entry ports suitable for single fiber, bundle & ribbon fiber cables.
•  Wall mounted type, indoor using, pole mounted & bottom base available. 
•  12, 24, 48, 96 … capacity customised. 

Specification:

Installation process

•  open the door of the box, lead the optical cable into the distribution box, cut off cable about 1m, and take proper length(about   1.5m),then strip the outer protective sheath. Leave 85mm cable reinforced core and cut off surplus part, insert the reinforced core   into the pressboard, then tighten it.
•  insert the optical cables peeled into the PVC tube (about 0.9m),and twist them around the fiber storage trays, fix it with nylon tie at   the inlet of the splice tray.
•  insert adaptors into the 6 ports adaptor fixing frame, then fix the frame, connect the adaptors and pigtails, hold the pigtail around the  two pillar which above and blow the trays.
•  take the splice tray out of the box, protect the fusion and connection point with heat shrinkable sleeve, then put it in the groove of  splice tray, put the cover back on the tray. Move back the splice tray and fix it on the box with screws.
•  lead the patch cord into the box through the special rubber parts and connect with adaptors, the other end of patch cord links with   optical devices.
•  close the box, mount on the wall after sealing confirmed.

 Accessories

•  installation manual 1 piece
•  heat shrinkable sleeve 24 stick
•  PVC protective tube 1m 1.5m
•  nylon tie 8 stick

Application

1.  FTTH access network.
2.  Telecommunication Networks
3.  CATV Networks
4.  Data communications Networks

OUR FACTORY
Twilight Optic Established in 2008,is a professional Hitech enterprise engaged in manufacture and distribution
of fiber optic products .Main products including fiber optic patch cord,pigtail, PLC splitter,adapter,FBT coupler,attenuator,connector,
media converter ,patch panel, splice closure etc.Which are applicate in Fiber optic telecommunications,LAN,FTTH,CATV&CCTV,
High speed transmission systems.

We also provide customers with one-stop optical fiber solutions, we can offer FTTH Solution products, data center solutions products, ODN solutions products, optical fiber cabling products,and various optical fiber equipment, testing tools, help customers to purchase all optical fiber products in one stop.Our products are exported to many foreign countries like USA, Canada, Australia, Spain, Brazil, Argentina, South Africa, Malaysia.We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.TWILIGHT OPTIC is looking forward to work with you.

OUR ADVANTAGE
We have 8 production lines for standard jumper and 4 PLC Splitter production lines. The most advanced imported polishing equipment and testing instruments enable our products have super quality, such as Senko polishing machine, interferometer, automatic cleaning machine and OTDR ,JGR and so on,All the products will be test 100% before shipment .