JFOPT CO.,LTD. |
Verified Suppliers
|
|
MPO-LC 3.0 Mini Cable 2.0mm Branch Patch Cord
The MPO-LC Branch Patch Cord is designed for optical signal convergence in distribution frames or signal splitting in optical modules, commonly used in the upgrade of 40G/100G networks. The MPO to 2.0mm LC Branch Patch Cord is available in configurations of 8/12/16/24 fibers. The MPO connector can be customized with male or female connectors, while the LC connector can be selected as simplex or duplex (TX/RX channel customization). The branch length can be customized for equal length, fan-out, or gradient lengths, among other options.
♦ Features
①Branch with 2.0mm sheath for easy installation and protection | ②Customizable fanout kit to match other outer diameter single/dual
jacket mini cables |
![]() | ![]() |
③LC branch can be selected as equal length or unequal length for
flexible deployment | ④100% factory termination and testing to ensure reliable
transmission performance |
![]() | ![]() |
♦ Applications
1.Data center network cabling.
2.40G/100G optical communication systems, QSFP optical modules.
3.Fiber optic communication systems, cable TV networks, telecom
networks.
4.Local area networks (LANs), wide area networks (WANs), FTTx.
♦ MPO Connector Parameters
Connector Type | Insertion Loss | Return Loss | |||
Typical | Maximum | ||||
MPO Connector | SM Standard | 0.2dB | 0.75dB | APC≥60dB | |
SM Low Loss | 0.1dB | 0.35dB | |||
MM Standard | 0.2dB | 0.6dB | PC≥25dB | ||
MM Low Loss | 0.1dB | 0.35dB | |||
Male/Female | Male: with Pin, Female: without Pin |
♦ LC Connector Parameters
Connector Characteristics | Connector Type | LC | |||
End Face Type | Single-mode: UPC/APC; Multimode: UPC | ||||
Ferrule Type | Grade-A zirconia ceramic ferrule | ||||
Connector Housing Color | Blue/Green/Beige/Aqua/Violet/Lime | ||||
Insertion Loss | ≤0.3dB/≤0.2dB/≤0.15dB | ||||
Return Loss | Single-mode: UPC≥50dB; APC≥60dB; Multimode: ≥25dB | ||||
Repeatability | ≤0.2dB | ||||
Interchangeability | ≤0.2dB |
♦ 3D Geometric Parameters
Items | Max | Min | ||
Radius of curvature (mm) | X | 2000 | -10000 | |
Y | - | 5 | ||
Angle (°) | X | 0.15 | -0.15 | |
Y(APC) | 8.2 | 7.8 | ||
Y(PC) | 0.2 | -0.2 | ||
Radius of curvature of optical core (mm) | - | 1 | ||
Fiber height (nm) | 3500 | 1000 | ||
Height difference of adjacent fiber (nm) | 500 | N/A | ||
Maximum negative coplanar (nm) | 300 | N/A |
♦ Cable Parameters
Project | Parameters | |||
Fiber Type | Optional : G652D / G657A1 / OM1 / OM2 / OM3 / OM4 / OM5 | |||
Fiber Count | Optional : 8/12/16/24 | |||
Strength Member | Aramid yarn | |||
Outer Jacket Material | Optional : LSZH / PVC / TPU | |||
Outer Jacket Diameter | 3.0mm | |||
Outer Jacket Color | Yellow / Orange / Aqua / Magenta / Custom | |||
Tensile Strength (Long-term) | 80N | |||
Tensile Strength (Short-term) | 150N | |||
Crush Resistance (Long-term) | 100N/cm | |||
Crush Resistance (Short-term) | 500N/cm | |||
Minimum Bending Radius (Dynamic) | 20D | |||
Minimum Bending Radius (Static) | 10D | |||
Operating Temperature | -20~60℃ | |||
Storage Temperature | -20~60℃ | |||
Fire Rating | Optional : OFN / OFNR / OFNP |
♦ Connector Color Options
MPO connector | ||||
Single mode | Green | Yellow | ||
Reference color number PANTONE 2270C | Reference color number PANTONE 100C | |||
Multimode | Beige | Aqua | ||
Reference color number PANTONE 7534C | Reference color number PANTONE 2226C | |||
Violet | - | |||
Reference color number PANTONE 7641C | ||||
♦ Branching Options
Main Cable Structure | |
Fanout with Equal Lengths | Fanout with Unequal Lengths |
Fanout 0.9mm Branch | |
Fanout 2.0/3.0mm Branch |
♦ Polarity Selection
MPO | ||||
LC | ||||
♦ Product Packaging
Thickened anti-static bag | Thickened carton |
♦ Factory Strength
Professionalism: JFOPT has been focusing on the production of MPO jumpers for over 10 years, with professional expertise and a complete set of top-notch equipment (SUMIX/JRG/OPTOTEST), can produce high-quality and high-performance MPO jumpers. | |||||
Manufacturing Capability: JFOPT has 5 MPO production lines and equipment, allowing for fast and efficient production of a large number of MPO jumpers to meet customer demands. | |||||
Quality Control: JFOPT implements strict quality control measures, including professional quality testing and monitoring at every stage from raw material procurement to production processes. We conduct 100% 3D interference testing, insertion loss testing, and end-face inspection to ensure product quality. | |||||
Standard Development: JFOPT can develop and strictly adhere to MPO jumper production standards according to customer requirements, ensuring product consistency and performance stability. | |||||
Technological Innovation: JFOPT places emphasis on technological innovation and has a professional R&D team continuously developing more advanced and higher-performing MPO jumpers. | |||||
Service and Technical Support: JFOPT provides comprehensive pre-sales and after-sales services, including technical consultation, product recommendations, and post-sales repairs, to meet customer needs and ensure customer satisfaction. | |||||
♦ Frequent Q&A
1.What issues should be considered when customizing MPO jumpers?
Jumper length / Cable material / Fiber type and fiber count / MPO
Male or female/ Insertion loss standards / Color requirements /
Labels and customization requests.
2.How do we ensure stable parameters for our MPO jumpers?
JFOPT's MPO jumpers undergo 100% 3D interferometer testing and 100%
IL&RL testing, ensuring stable parameters.
3.What is our delivery lead time?
We have a monthly production capacity of 30,000+ MPO connectors,
ensuring prompt delivery.
4.What other MPO-related products do we offer?
In addition to MPO jumpers, we also produce MPO loopbacks, MPO
attenuators, MPO male to female adapters, MT jumpers, and other MPO
related products.