|
[China]
Trade Verify
Address: 26Minyi Road, Xinqiao, Songjiang Industrail Zone Shanghai China
Contact name:Laura
LonRise Equipment Co. Ltd. |
|
Verified Suppliers
|
|
|
ES1D2X16SSC2 Huawei 16-Port 10GBASE-X Interface Card,SC,SFP+ Connector type
Huawei 16-Port 10GBASE-X Interface Card(SC,SFP+) ES1D2X16SSC2
The ES1D2X16SSC2 can be installed in:
Functions of the ES1D2X16SSC2
| Function | Description |
|---|---|
| Basic function | Provides sixteen 10GE optical ports for data transmission and switching. |
| Distributed forwarding | Performs concurrent data forwarding using a distributed data plane. |
| Software feature | Service port clustering |
| Hot swapping | The ES1D2X16SSC2 is hot swappable. |
If service ports on the ES1D2X16SSC2 need to be used to set up a CSS, the card can only be installed in the S7712 or S7706 chassis and must use 10G optical modules and 10G cables.
Number | Indicator | Color | Description |
|---|---|---|---|
| 1 | ACT indicator of a lower optical port | Yellow | Blinking: The port is transmitting and receiving data. |
| 2 | ACT indicator of an upper optical port | ||
| 3 | LINK indicator of a lower optical port | Green | Steady on: A link has been established on the port. |
| 4 | LINK indicator of an upper optical port | ||
| 5 | RUN/ALM: running status indicator | Green | Steady on: The card has been powered on, but the software is not running. Slow blinking: The card software is running properly. Fast blinking: The card software is starting. |
| Red | Steady on: The card has failed and the fault requires manual intervention. | ||
| Yellow | Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.) |
Optical port attributes (10GE optical module, high-speed cable or SFP+ optical cable)
| Attribute | Description |
|---|---|
| Connector type | SFP+ |
| Optical port attributes | Depend on the SFP+ - SFP+ high-speed cable (1 m, 3 m, 5 m, 10 m), QSFP+ - 4*SFP+ high-speed cable (1 m, 3 m, 5 m), SFP+ optical module, or SFP+ optical cable used. For the optical modules supported by the ES1D2X16SSC2 and their attributes, see 10GE SFP+ Optical Modules, 10GE-CWDM SFP+ Optical Modules and 10GE-DWDM SFP+ Optical Modules. |
| Standards compliance | IEEE 802.3ae |
| Frame format | Ethernet_II, Ethernet_SAP, Ethernet_SNAP |
| Network protocol | IP |
Specifications of the ES1D2X16SSC2
Item | Description |
|---|---|
| Physical specifications |
|
| Environment specifications |
|
