Active Member
|
[China]
Contact name:Fang
Shanghai Hengxiang Optical Electronic Co., Ltd. |
|
|
K52 ABZ 3Phase blind hollow Shaft Encoder Incremental Encoder for Office for Automation
Lead time
3-5 working days for sample after full paid
7-15 days for mass production after full paid
Some Part No. for K52 Series
K52-T12C8192B15
K52-T6E10000B14
K52-C3V5000B10
K52-C2F4096B8
K52-TE1N3600Q14
K52-TE121024/4B10
K52-T6E1440Q12
K52-C4C1250Q10
K52-TE3F1200Q8
K52-T2N1024Q14
K52-TE1F1000B15
K52 series encoder Characteristics
Items | Basic parameters |
Brand | HENGXIANG |
Encoder type | Incremental encoder |
External diameter | 51mm |
Thickness | 39mm |
Installation dimension | R27.5mm(spring plate 50T55) |
Hollow shaft type | through hole or blind hole |
Hollow shaft diameter | 8mm,10mm,12mm;14mm;15mm |
Resolution | 1000;1024;1200;1250;1440;2000;2048;2500;2880;3000;3600; |
4096;5000;5760;8192;10000；11520；16384；20000；23040 | |
1000/4;1000/6;1000/8;1024/4;1024/6;1024/8;2048/4;2048/6; | |
2048/8;4096/4;4096/6;4096/8;8192/4;8192/6;/8192/8 | |
Output phase | Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W- |
Output mode | NPN/PNP(Open Collector Output) |
| Voltage output |
| Push-pull output |
| line drive (26LS31) TTL |
| line drive(DC8-30V) HTL |
| TTL(DC5V) phase ABZ are back of phase UVW |
Consumption current | 100mA MAX |
Top response frequency | 300KHZ |
Cable length | 1000mm(cable with shielding) |
Protection grade | IP50 ; IP65 |
Cable length | 1M (cable length could be added appropriately by |
| require, but it need payment individually) |
Certification | CE |
Notice for encoder installation
1. Please read the encoder specification carefully before installation
2. Encoder is belong to precision instrument, so we should avoid shock or vibration to protect interior parts.
3. The power supply voltage must be holded within specified range, or encoder could be destroyed.
4. Notice coaxially requirements when you install the power shaft, please use flexible coupling and do not press encoder forcibly.
5. Shielding cable of encoder must be connected to avoid electromagnetism interference of alternating current, cables of encoder should be layout individually.
6. Wiring diagram connection should be strictly follow the specified color in catalogue, or encoder interior circuit may be destroyed
7. Encoder should be apart from powerful magnetic field, dust, oil, water, higher (lower) temperature and caustic or flammable material during working.
8. The encoder cable signal can’t be drew or bent forcibly.
Advantage of “HENGXIANG” encoder factory
