|
[China]
Trade Verify
Address: 11F DongMing Building, Minzhi Street, Longhua District, Shenzhen , China
Contact name:Steve Wang
Shenzhen HiLink Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
C+L Band WDM Fiber Optic Circulator Polarization Insensitive Components
General
An optical circulator is a special optical passive component apply in optical device
it can be used to separate optical powers that transfer in opposite directions.
by in one single optical fiber, analogous to the operation of an electronic circulator.
An standard optical circulator is a three-port device that allows light to travel in only one direction
Example - from port 1 to port 2, then from port 2 to port 3.
This feature is very important to optical bidirectional transmission and communication.
Usually, it is used for optical transceiver, FBG( fiber Bragg grating) filter and optical amplifier.
Features:
Application
Specifications
| Parameter | P Grade | |
| Configuration | Port 1 to Port 2 to Port 3 | |
| Operation Wavelength (nm) | 1525 to 1610 | |
| Isolation (dB) | Typical | 0.8 |
| Maximum | 1.0 | |
| Typical Isolation (dB) | 50 | |
| Minimum Isolation (dB) | 35 | |
| Cross Talk (dB) | ≥50 | |
| Polarization Dependent Loss (dB) | <0.2 | |
| Polarization Mode Dispersion | <0.1 | |
| Return Loss(dB) | ≥50 | |
| Power Handling (mW) | 500 | |
| Opterating Temperature (℃) | -5~+75 | |
| Storage Temperature (℃) | -40~+85 | |
| Package dimension (mm) | Φ5.5xL50 orΦ5.5xL63 | |
Specifications may change without notice.
Above specification are for device without connector.
Our factory shows
